M3098-H - Security Camera AXIS - Free user manual and instructions
Find the device manual for free M3098-H AXIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Network security camera |
| Brand | AXIS |
| Model | M3098-H |
| Video resolution | Full HD 1920 x 1080 |
| Sensor | CMOS 1/2.8" |
| Night vision | Integrated IR LEDs, 10 m range |
| Horizontal viewing angle | 88° |
| Video compression | H.265, H.264, MJPEG |
| Power supply | PoE IEEE 802.3af, 4 W |
| Connectivity | Ethernet RJ45 10/100 |
| Motion detection | Yes |
| Multiple streaming | 2 configurable streams |
| Built-in microphone | Yes |
| Analytics functions | Motion detection, anti-tamper |
| Protection rating | IP41 (indoor) |
| Operating temperature | 0 °C to 45 °C |
| Operating humidity | 10 to 85 % non-condensing |
| Dimensions (W x H x D) | 60 x 45 x 25 mm |
| Weight | 120 g |
| Mounting | Wall mount supplied with mounting kit |
| Care and cleaning | Soft dry cloth, avoid abrasive products |
| Security | Password, HTTPS, IP filtering |
| Spare parts | Not available, device not user-serviceable |
| General information | 3-year warranty, online documentation |
Frequently Asked Questions - M3098-H AXIS
How to reset the AXIS M3098-H camera to factory settings?
Use the reset button located on the back of the housing. Hold it down for 5 seconds until the LED blinks green. The camera restarts and settings return to factory values. The IP address reverts to the default IP.
What is the default IP address of the camera?
The default IP address is 192.168.0.90. If the camera is set to DHCP, find the assigned address using AXIS IP Utility software.
How to install the camera on a wall?
Attach the supplied wall mount using the wall plugs and screws. Then screw the camera onto the mount. Adjust the viewing angle by orienting the housing. Make sure the camera is securely fastened.
How to access the camera remotely from a smartphone?
Enable port 80 or 443 on your router and forward it to the camera's local IP address. You can also use the AXIS Cloud Connect service for secure access without opening a port.
How to change the administrator password?
Open the camera's web interface, go to Settings > Accounts, select the 'root' user and click 'Change password'. Use a strong password of at least 8 characters.
Why is night vision not activating?
Check that IR mode is enabled in the settings. The camera switches to night mode automatically when lighting is low. Make sure the light sensor is not obscured.
How to update the camera firmware?
Download the firmware from Axis.com. In the interface, go to Settings > System > Update, select the file and click 'Update'. Do not disconnect the power during the operation.
How to connect the camera to an NVR recorder?
Connect the camera to the same network as the NVR. Use its IP address and the ONVIF protocol to add it automatically. The access credentials are those set during initial configuration.
What to do if the camera is offline?
Check the Ethernet wiring and PoE power. Restart the camera. Use AXIS IP Utility to detect the camera on the network. If nothing works, perform a hardware reset.
How to clean the camera lens?
Use a soft microfiber cloth dampened with a lens cleaner. Avoid abrasive products and do not touch the sensor directly. Clean the housing regularly with a dry cloth.
User questions about M3098-H AXIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual M3098-H - AXIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M3098-H by AXIS.
USER MANUAL M3098-H AXIS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXIS
Model : M3098-H
Category : Security Camera