POWEBIWS2 - Metal Lathe PowerPlus - Free user manual and instructions
Find the device manual for free POWEBIWS2 PowerPlus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Metal lathe |
| Brand | PowerPlus |
| Model | POWEBIWS2 |
| Main use | Turning, threading and drilling of metal parts |
| Supply voltage | 230 V / 50 Hz |
| Motor power | 550 W |
| Speed range | 0 - 2500 rpm (variable speed) |
| Distance between centers | 300 mm |
| Center height | 80 mm |
| Maximum turning diameter | 160 mm |
| Threading | Metric and imperial |
| Chuck | Self-centering 3-jaw chuck, diameter 80 mm |
| Tool holder | 4-position turret |
| Longitudinal feed | Yes, with automatic feed |
| Cross feed | Yes |
| Bed material | Cast iron |
| Dimensions (L x W x H) | 700 x 300 x 350 mm |
| Weight | 35 kg |
| Safety | Protective cover, emergency stop |
| Maintenance | Regular cleaning, lubrication of slides |
| Included accessories | Chuck, faceplate, turning tools, steady rest |
| Standards | CE |
| Repairability | Spare parts available |
Frequently Asked Questions - POWEBIWS2 PowerPlus
What is the motor power of the POWEBIWS2 lathe?
The PowerPlus POWEBIWS2 metal lathe is equipped with a 550 W motor, offering sufficient power for working with non-ferrous metals and mild steel.
What is the maximum turning capacity?
The maximum capacity is 160 mm in diameter over the bed, with a distance between centers of 300 mm. This allows turning medium-sized parts with precision.
How do I change the rotation speed?
The speed is variable from 0 to 2500 rpm. Use the electronic speed controller for continuous adjustment, and adjust the belt for specific speed ranges if necessary.
How do I lubricate the lathe slides?
First clean the slides with a clean cloth, then apply a light lubricating oil to the guide surfaces. Repeat this operation before each prolonged use.
What accessories are included with the POWEBIWS2?
The lathe comes with a 3-jaw chuck, a faceplate, turning tools and a steady rest. These accessories allow you to start your turning work immediately.
How do I install the lathe correctly?
Place the lathe on a stable and level workbench. Secure it firmly using the mounting holes to avoid vibrations. Check the alignment before first use.
What speed should I use for different materials?
For aluminum, use a high speed (1500-2500 rpm). For mild steel, reduce to 500-1000 rpm. For brass, around 1000-1500 rpm. Adjust the speed according to the diameter of the workpiece.
What to do in case of excessive vibrations?
Check that the workpiece is properly tightened in the chuck, that the tool is correctly sharpened, and that the speed is not too high for the rigidity of the workpiece. Also make sure the lathe is stable on its support.
How do I maintain the chuck?
Regularly clean the chuck to remove chips and dust. Lubricate the jaws with a light oil and check that the clamping remains precise. Avoid forcing beyond the chuck's capacity.
Is it suitable for beginners?
Yes, the PowerPlus POWEBIWS2 is a compact size lathe with variable speed, which makes it accessible for beginners. However, it is recommended to read the manual carefully and wear protective equipment.
User questions about POWEBIWS2 PowerPlus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Metal Lathe in PDF format for free! Find your manual POWEBIWS2 - PowerPlus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POWEBIWS2 by PowerPlus.
USER MANUAL POWEBIWS2 PowerPlus
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PowerPlus
Model : POWEBIWS2
Category : Metal Lathe