DAID550L - Drill DAEWOO - Free user manual and instructions
Find the device manual for free DAID550L DAEWOO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | DAEWOO |
| Model | DAID550L |
| Power Source | Corded Electric |
| Input Power | 550 W |
| Voltage | 230 V AC |
| Frequency | 50 Hz |
| No-Load Speed | 0 - 3000 RPM |
| Chuck Size | 13 mm keyed |
| Drilling Capacity (Wood) | 30 mm |
| Drilling Capacity (Steel) | 13 mm |
| Reverse Function | Yes |
| Variable Speed Trigger | Yes |
| Lock-on Button | Yes |
| Auxiliary Handle | Included |
| Depth Gauge | Included |
| Insulation Class | Double insulated (Class II) |
| Cable Length | 2.0 m |
| Weight | 1.7 kg |
| Dimensions (L x W x H) | 280 x 200 x 75 mm |
| Included Accessories | Chuck key, auxiliary handle, depth stop |
| Maintenance | Clean with dry cloth; keep vents clear |
| Repairability | Spare parts available via service centers |
Frequently Asked Questions - DAID550L DAEWOO
What is the power rating of the DAEWOO DAID550L drill?
The DAEWOO DAID550L is equipped with a 550 W motor, providing sufficient power for drilling into wood, plastic, and metal in household applications.
How do I change the drill bit?
To change the bit, first unplug the drill. Use the chuck key to loosen the chuck by turning it counterclockwise. Insert the new bit, then tighten the chuck clockwise with the key. Ensure the bit is securely held before operation.
Can the DAID550L be used for screwdriving?
Yes, the drill has a variable speed trigger and reverse function, allowing it to drive and remove screws when fitted with suitable screwdriver bits. Select a low speed for better control.
How do I control the drilling speed?
The speed is controlled by the trigger: pressing it lightly provides slower speeds, while pressing fully increases speed up to 3000 RPM. The lock-on button can fix the trigger for continuous operation.
How do I set the rotation to reverse?
Use the direction switch located above the trigger. Slide it to the left for forward rotation, or to the right for reverse, depending on the model's orientation. Always wait for the chuck to stop before changing direction.
What materials can the DAID550L drill?
The drill can drill wood up to 30 mm and steel up to 13 mm with HSS bits. For masonry, it is recommended to use a hammer drill; this model is not designed for concrete.
How should I maintain the drill?
Regularly clean the ventilation slots with a soft brush or dry cloth to prevent overheating. Wipe the exterior with a damp cloth, but never use solvents. Keep the chuck lubricated and replace worn carbon brushes promptly.
Is the drill double insulated?
Yes, the DAID550L has Class II double insulation, which means it does not require an earth wire. It is safe to use with two-pin plugs.
What accessories come in the box?
The package includes the drill, a chuck key, an auxiliary handle, and a depth stop. These tool parts help improve control and accuracy during drilling.
Where can I find spare parts and repairs?
Spare parts for the DAEWOO DAID550L are available through authorized service centers. You can also contact the brand's support with your model number to order components such as chucks, bearings, or switches.
User questions about DAID550L DAEWOO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DAID550L - DAEWOO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAID550L by DAEWOO.
USER MANUAL DAID550L DAEWOO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAEWOO
Model : DAID550L
Category : Drill