MX-M3051 - Printer SHARP - Free user manual and instructions
Find the device manual for free MX-M3051 SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunction monochrome laser printer (print, copy, scan) |
| Technology | Laserelectrophotographic |
| Maximum Print Speed | 30 pages per minute (A4) |
| Print Resolution | 1200 x 1200 dpi |
| Scan Resolution | 600 x 600 dpi (optical) |
| Duplex Printing | Automatic standard |
| Paper Capacity | Standard 600 sheets; maximum 2,100 sheets with optional trays |
| Interfaces | USB 2.0, 10/100/1000 Ethernet |
| Control Panel | 5.7-inch color touchscreen |
| Dimensions (W x D x H) | 575 x 540 x 402 mm |
| Weight | 25 kg (without optional units) |
| Power Consumption | Maximum 1,450 W; standby 80 W |
| Power Supply | 220–240 V AC, 50/60 Hz |
| Warm-up Time | 14 seconds |
| First Print Time | 6.2 seconds |
| Monthly Duty Cycle | Up to 120,000 pages |
| Recommended Monthly Volume | 3,000 to 15,000 pages |
| Memory | 1 GB (standard) |
| Maintenance | Replace toner cartridge and drum unit with genuine Sharp consumables |
| Safety & Compliance | CE marked; energy-efficient with auto shutdown mode |
| Spare Parts & Repairability | Long-life drum unit, maintenance kit and optional trays available |
| General Information | Designed for medium-sized workgroups, energy-efficient and secure printing |
Frequently Asked Questions - MX-M3051 SHARP
How to load paper into the MX-M3051?
Open the paper tray located at the front, adjust the paper guides to the paper size, and load the paper with the print side facing up. Make sure the stack does not exceed the indicated fill line. Close the tray and select the correct paper size on the control panel.
How to replace the toner cartridge?
Open the front cover, pull out the toner cartridge holder, then remove the old cartridge. Unpack the new toner cartridge and shake it gently, then insert it into the holder until it clicks. Close the cover and run a test print.
How to clear a paper jam?
Check the display for the location of the jam. Open the appropriate covers (front, rear, or duplex unit), gently remove the jammed paper by pulling it in the direction indicated. Avoid tearing the paper. Remove all fragments, close the covers, and press the start or reset button.
How to connect the printer to a network?
Connect the printer to your router using an Ethernet cable. On the control panel, go to System Settings > Network Setting and enable Ethernet. Set IP address via DHCP or manually. Install the network driver on your computer and select the printer from the device list.
What is the recommended maintenance for the MX-M3051?
Regularly clean the glass platen and ADF, replace the toner and drum when the print quality declines, and use the recommended maintenance kit after every 200,000 pages. Keep the area around the printer free of dust and ensure proper airflow.
How to enable duplex printing?
In the printer driver properties, select 'Duplex' or 'Print on Both Sides' and choose flip on long edge or short edge. For copies, press the Duplex Copy key on the touchscreen and select the desired duplex mode before pressing Start.
How to scan documents to a computer?
Install the Sharpdesk scanning software or use the built-in network scan function. On the printer, press the Scan button, select the destination as 'Computer', choose the profile, and press Start. Ensure the printer and computer are on the same network.
Can I print from a USB flash drive?
Yes, plug the USB flash drive into the USB port on the front panel. On the touchscreen, select 'USB Memory' and choose the PDF, TIFF, or JPEG file to print. You can also print stored documents if the optional hard drive is installed.
How to set the power saving mode?
Go to System Settings > Energy Save and choose the time delay for entering power save mode. The printer enters standby and auto shutdown after a specified period, reducing power consumption. You can also press the Energy Save button on the control panel manually.
What paper types and weights are supported?
The MX-M3051 supports plain paper, recycled paper, letterhead, and heavy paper from 55 to 200 gsm in trays and options. For the bypass tray, weights up to 300 gsm are accepted. Use recommended paper for best results and to avoid jams.
User questions about MX-M3051 SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual MX-M3051 - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX-M3051 by SHARP.
USER MANUAL MX-M3051 SHARP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHARP
Model : MX-M3051
Category : Printer