WSPE7612A - Washing machine BEKO - Free user manual and instructions
Find the device manual for free WSPE7612A BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | BEKO |
| Model | WSPE7612A |
| Rated Capacity | 7 kg |
| Maximum Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Annual Energy Consumption | 190 kWh |
| Annual Water Consumption | 10,500 L (based on 220 cycles) |
| Dimensions (W x D x H) | 600 mm x 500 mm x 850 mm |
| Depth with Door Open | 1000 mm |
| Net Weight | 65 kg |
| Washing Noise Level | 58 dB (A) |
| Spinning Noise Level | 76 dB (A) |
| Display | LED display |
| Washing Programs | Cotton, Synthetics, Delicates, Wool, Hand Wash, Quick 14, Daily Express |
| Drum Volume | 60 L |
| Delayed Start | Up to 9 hours |
| Child Lock | Yes |
| Overflow Protection | Yes |
| Unbalanced Load Detection | Yes |
| Drum Material | Stainless steel |
| Power Supply | 220-240 V, 50 Hz |
| Power Rating | 2200 W |
| Spare Parts Availability | 10 years (as per EU regulations) |
Frequently Asked Questions - WSPE7612A BEKO
How to install the BEKO WSPE7612A washing machine?
Ensure the machine is placed on a flat, stable surface. Connect the water inlet hose to the cold water tap, insert the drain hose into the standpipe, and plug into a grounded outlet. Remove all shipping bolts before first use.
How do I clean the detergent drawer?
Remove the drawer by pulling it out and pressing the release lever. Rinse under warm water and clean the softener compartment with a small brush. Reinsert after drying.
How can I reduce spin noise?
Make sure the machine is level and the transport bolts are removed. Do not overload the drum; distribute laundry evenly. Check that the floor is stable.
What does the "Water off" tap error mean?
This indicates no water supply. Check that the water tap is open, the inlet hose is not kinked, and the filter at the tap is clean.
How do I clean the pump filter?
Before cleaning, unplug the machine. Open the service flap at the front, place a container under the pump, unscrew the filter and remove any residues. Replace and close the flap.
Can I wash curtains in this machine?
Yes, use a delicate program like Synthetics or Hand Wash at max 40°C and add a reduced spin speed. Follow the fabric care label.
How do I use the delayed start function?
Load the laundry and add detergent, then press the Delayed Start button repeatedly to set the delay (up to 9 hours). The door will lock and the appliance will start automatically.
What type of detergent is recommended?
Use high-efficiency (HE) detergents suitable for front-load washers. Avoid using too much detergent to prevent excessive foaming.
How often should I run a maintenance wash?
Run a maintenance wash at 90°C with no laundry and no detergent once a month to prevent bacteria and odours. Use a drum clean program if available.
What to do if the door won't open after a cycle?
Wait 2-3 minutes for the door lock to release after the cycle is done. If the door remains locked due to water inside or an error, use the Drain & Spin program to empty the drum, then try again.
User questions about WSPE7612A BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WSPE7612A - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WSPE7612A by BEKO.