CC2 67T-84 - Tumble dryer CANDY - Free user manual and instructions
Find the device manual for free CC2 67T-84 CANDY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Candy |
| Model | CC2 67T-84 |
| Product Type | Freestanding Tumble Dryer |
| Drying System | Condenser (ventless) |
| Load Capacity | 7 kg |
| Drum Volume | 118 L |
| Energy Efficiency Class | C |
| Annual Energy Consumption | 187 kWh |
| Noise Level | 65 dB |
| Dimensions (H × W × D) | 85 cm × 60 cm × 60 cm |
| Net Weight | 42 kg |
| Power Supply | 220–240 V, 50 Hz |
| Rated Power | 2.0 kW |
| Number of Programmes | 16 |
| Display | LED |
| Delay Start | Yes (up to 24h) |
| Anti-Crease Function | Yes (with phase at the end of cycle) |
| Reverse Tumbling | Yes |
| Child Lock | Yes |
| Condenser Filter | Easily accessible and clearable |
| Water Container | Front mounted, capacity A+ |
| Spare Parts Availability | 7–10 years after purchase |
| Installation | Freestanding, requires 2 cm side clearance |
Frequently Asked Questions - CC2 67T-84 CANDY
How do I install the Candy CC2 67T-84 tumble dryer?
Installation is straightforward. Place the dryer on a flat, stable surface with about 2 cm clearance on the sides for ventilation. Do not obstruct the condenser vent. Simply plug the supplied power cord into a 220-240V outlet and ensure the water container is properly inserted. For built-in installation, leave a gap at the rear for airflow.
How often should I clean the condenser filter?
Clean the condenser filter after every drying cycle. Locate the filter on the lower front panel, open it, and remove lint and fluff with a soft cloth or vacuum. A blocked filter reduces drying efficiency and increases energy consumption. Wash the filter with warm soapy water every month and let it dry completely before reuse.
What is the anti-crease function and when should I use it?
The anti-crease setting tumbles the clothes periodically for up to 6 hours after the drying cycle ends, preventing wrinkles from setting in. It is especially useful if you cannot remove the laundry immediately. Simply activate it at the beginning of the cycle or via the delay start menu to have fresh, low-crease laundry when you return.
Is this dryer ventless?
Yes, the Candy CC2 67T-84 is a condenser dryer, which means it does not require an external exhaust hose. Moisture is collected in a water container that you empty after use. Alternatively, you can connect a hose to a drain for continuous operation, making it ideal for apartments and spaces without a vent.
How can I reduce energy consumption with this dryer?
To lower energy usage, spin your clothes at high speed before drying, as this removes more water. Use the eco programs that run at lower temperatures and choose the sensor drying mode to avoid over-drying. Clean the condenser filter regularly and ensure the room temperature is moderate. Additionally, dry full loads—this is more efficient than two half loads.
What is the maximum load capacity?
The maximum dry weight load is 7 kg. Overloading may cause poor drying results, increased wrinkling, and excessive vibration. For effective drying, always sort by fabric type and do not exceed the recommended capacity. For bulky items like quilts or towels, consider a reduced load to ensure optimal performance.
What should I do if the dryer shows an error code?
Refer to the troubleshooting section of the manual first. Common issues include a full water container, a blocked condenser filter, or a kinked hose. If the code persists, switch off the dryer, wait 10 minutes, then restart. For specific codes like E1 (heating) or E3 (sensor), contact Customer Service with the model number.
Can I stop the dryer mid-cycle?
Yes, you can pause the cycle at any time by pressing the Start/Pause button. The drum will stop and you can safely remove or add items. Recall that the dryer will resume automatically if you do not restart it within a few minutes, so press the button again to continue or choose a flexible drying option.
How do I clean the water container?
Remove the water container from the bottom right corner by pulling it forward. Empty the water into a sink and rinse the container with warm water. Do not use abrasive cleaners. Dry the outside and push it back until it clicks. If the container full indicator lights up, the dryer will not start until it is emptied.
What is the delay start function and how does it work?
The delay start allows you to set the dryer to begin a cycle at a later time, up to 24 hours in advance. You can use it to dry laundry overnight or when electricity rates are lower. Select a program, press Delay to choose the hour, and press Start. The display will count down, and the cycle will begin automatically.
User questions about CC2 67T-84 CANDY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual CC2 67T-84 - CANDY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CC2 67T-84 by CANDY.
USER MANUAL CC2 67T-84 CANDY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CANDY
Model : CC2 67T-84
Category : Tumble dryer