GARDEN SHED - Washing machine Uniprodo - Free user manual and instructions

Product Type	Garden shed / outdoor storage building
Brand	Uniprodo
Model	GARDEN SHED
Intended Use	Outdoor storage for garden tools, equipment and supplies
Material	Metal panels with painted protective finish
Door Type	Sliding door with guide rails
Roof Design	Sloped roof requiring clearance of leaves and snow
Foundation	Rectangular and triangular base plates included
Assembly Required	Yes, with step-by-step instructions for base, walls, roof and door
Recommended Team Size	Two or more people
Tools Needed	Basic hand tools; work gloves recommended
Weather Resistance	All washers seal off weather; optional silicone gasket
Moisture Control	Plastic sheeting under floor and good ventilation recommended
Care & Maintenance	Clean and wax exterior; polish scratches; lubricate door guides annually
Safety	Follow local building codes; install only on dry, calm day
Spare Parts	Individual panels and fasteners available with part numbers
Repairability	Components replaceable using standard tools
Included Fasteners	Screws (S1), washers (F1), bolts (S2) and door guides (GD)
Manual Languages	EN, DE, CS, HU, PL, ES
Power Supply	Not required (no electrical components)

Frequently Asked Questions - GARDEN SHED Uniprodo

How long does it take to assemble the Uniprodo GARDEN SHED?

The assembly time depends on experience and teamwork, but with two people and basic tools, it typically takes a few hours. The 13-page manual provides step-by-step instructions for the base, walls, roof and door.

What tools are required for assembly?

You will need basic hand tools such as screwdrivers, wrenches and a hammer. Work gloves are strongly recommended to prevent injury from sharp metal edges.

Can I install the shed alone?

It is recommended to have two or more people for assembly. One person can position panels while the other handles fasteners, making the process safer and easier.

How should I prepare the ground before installation?

The manual advises checking local building codes and using plastic sheeting under the entire floor surface. This reduces moisture build-up and creates a more durable foundation.

What maintenance does the shed require?

Periodically clean and wax the exterior, polish scratched areas immediately, keep the roof free of leaves and snow, and lubricate the sliding door guides with furniture cleaner or silicone spray annually.

Is the shed weatherproof?

Yes, the shed is designed to resist weather. Use all provided washers to seal the fasteners and prevent scratching of the metal. An optional silicone gasket can be used to seal the entire building for extra protection.

What should I avoid during installation?

Do not install the shed on a windy day or on wet or muddy ground. Also make sure the weather is dry and calm, and follow all local regulations.

Can I repair a damaged panel?

Yes, individual parts are listed with part numbers in the manual. You can order replacement panels and fasteners and repair using standard tools. Polish and touch up scratches according to manufacturer's recommendations.

How do I keep the sliding door working smoothly?

Always clean the door guides of dirt and contaminants. Once a year, apply furniture cleaner or silicone spray to the guides. Keep the door closed when not in use to prevent wind damage.

Does the shed require an electrical connection?

No, the GARDEN SHED is a non-electric structure. It requires no power supply. The manual is purely focused on mechanical assembly and maintenance.

USER MANUAL GARDEN SHED Uniprodo

Read instructions before use.

To avoid injury, work gloves are recommended during assembly.

PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may differ from the actual product.

BEFORE ASSEMBLY

Before starting installation, check local building codes for foundations, locations, and other requirements. Please read this instruction manual carefully.

WEATHER OBSERVATION: Make sure the weather on the day you choose to install the product is dry and calm. Do not install the product on a windy day. Be careful on wet or muddy ground.

TEAMWORK: If possible, two or more people should work together to assemble the building. One person can position parts or panels while the other is able to handle fasteners and tools.

CARE & MAINTENANCE

Exterior: Periodically clean and wax the exterior. It is recommended to polish the scratched areas immediately after the damage occurs. Clean brush area, wash and touch up according to manufacturer's recommendations.

ROOF: Keep the roof free of leaves and snow. It is recommended to use a broom with a long handle and soft bristles to remove dirt. Large amounts of snow on the roof can damage the building and make it unsafe to enter.

DOORS: Always clean the guides of dirt and other contaminants that prevent the door from sliding. Every year, it is recommended to lubricate the door guides with furniture cleaner or silicone spray. Most of the time, it is recommended to keep the door closed to prevent wind damage.

FASTENERS: Use all washers provided to seal off the weather and prevent the screws from scratching the metal. Regularly check the building for loose bolts, screws, nuts, etc. and tighten them if necessary.

MOISTURE: Plastic sheeting under the entire floor surface and good ventilation will reduce moisture build-up.

ADDITIONAL TIPS: The printed part numbers on the product can be washed off with soap and water. A silicone gasket can be used to seal the entire building. Combustible and corrosive materials should be stored in sealed containers.

OBJAŚNIENIE SYMBOLI

DE	EN	PL	CZ	FR	IT	ES	HU	DA
Teile	Parts	Części	Díly	Les pièces	Parti	Partes	Alkatrészek	Dele
Nummer	No.	Numer	Číslo	Nombre	Numero	Número	Szám	Nummer
Menge	Qty.	Ilość	Množství	Quantité	Quantità	Cantidad	Mennyiség	Antal

BASIS ZUSAMMENBAUEN | BASE ASSEMBLE | MONTAŽ PODSTAWY | SESTAVENÍ ZÁKLADNY

ASSEMBLAGE DE LA BASE | ASSEMBLARE LA BASE | MONTAJE DE BASE | ALAP ÖSSZESZERELÉS | BASE SAMLES

PART	NO.	Qty.
	4	1
	F1	4
	S2	4

WANDMONTAGE | WALL ASSEMBLE | MONTAŽ ŚCIANY | MONTAŽ STĚNY | ASSEMBLAGE DU MUR MONTAGGIO A PARETE | MONTAJE EN PARED | FAL ÖSSZESZERELÉS | VÆGSAMLES

03.01.2024

PART	NO.	Qty.
	P2	1
	F1	3
	S2	3

PART	NO.	Qty.
	P2	2
	F1	6
	S2	6

PART	NO.	Qty.
	10	1
	F1	6
	S2	6

03.01.2024

PART	NO.	Qty.
	9	1
	F1	2
	S2	2

PART	NO.	Qty.
	P3	1
	F2	2
	F1	10
	S2	10

PART	NO.	Qty.
	P4B	1
	F2	2
	F1	6
	S2	6

03.01.2024

PART	NO.	Qty.
	6	1
	F1	1
	S2	1

RECHTECKIGE PLATTE ZUSAMMENBAUEN | RECTANGULAR PLATE ASSEMBLE | MONTAŻ PŁYTY PROSTOKĄTNEJ SESTAVENÍ OBDÉLNÍKOVÉ DESKY | ASSEMBLAGE DE PLAQUE RECTANGULAIRE | MONTAGGIO PIASTRA RETTANGOLARE | MONTAGGIO PIASTRA RETTANGOLARE | MONTAGGIO PIASTRA RETTANGOLARE REKTANGULÆR PLADE SAMLES

03.01.2024

DREIECKSPLATTE ZUSAMMENBAUEN | TRIANGLE PLATE ASSEMBLE | MONTAŻ PŁYTY TRÓJKĄTNEJ SESTAVENÍ TROJÚHELNÍKOVÉ DESKY | ASSEMBLAGE DE LA PLAQUE TRIANGULAIRE | ASSEMBLAGGIO DELLA PIASTRA TRIANGOLARE | MONTAJE DE PLACA TRIANGULAR | HÁROMSZÖG LEMEZ ÖSSZEÁLLÍTÁSA TREKANTPLADE SAMLES

DACH MONTIEREN | ROOF ASSEMBLE | MONTAŽ DACHU | S MONTAŽ STŘECHY | ASSEMBLAGE DU TOIT MONTAGGIO DEL TETTO | MONTAJE DEL TECHO | TETŐ ÖSSZESZERELÉS | TAG SAMLES

PART	NO.	Qty.
	P5	3
	P7	1
	F1	19
	S2	19

PART	NO.	Qty.
	16	1
	15	2
	GC	2
	F1	2

PART	NO.	Qty.
	17	1
	GC	2
	F1	4
	S2	2

TÜRK MONTIEREN | DOOR ASSEMBLE | MONTAŻ DRZWI | MONTÁŻ DVEŘÍ | ASSEMBLAGE DE PORTE ASSEMBLAGGIO DELLA PORTA | MONTAJE DE PUERTA | AZ AJTÓ ÖSSZESZERELÉSE | D∅R SAMLES

PART	NO.	Qty.
	20U	1
	20D	1
	D1R	1
	D1L	1
	F2	7
	GD	2

PART	NO.	Qty.
	GB	1
	F2	3

PART	NO.	Qty.
	F3	4

X2

GD is placed in the guide rail groove of the foundation

EN "GD" is placed in the guide rail groove of the foundation.

PART	NO.	Qty.
	S1	122

NOTES/NOTIZEN

Our customers' satisfaction is our main goal!

Please contact us with questions AT: