KFWM I 6404 W - Washing machine Kernau - Free user manual and instructions
Find the device manual for free KFWM I 6404 W Kernau in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Freestanding washing machine |
| Brand | Kernau |
| Model | KFWM I 6404 W |
| Color | White |
| Energy class | A+++ |
| Capacity (kg) | 6 |
| Maximum spin speed (rpm) | 1400 |
| Width (cm) | 60 |
| Depth (cm) | 55 |
| Height (cm) | 85 |
| Noise level - spin (dB) | 76 |
| Noise level - wash (dB) | 59 |
| Water consumption per cycle (L) | 45 |
| Annual energy consumption (kWh) | 176 |
| Number of programmes | 15 |
| Display | LED digital |
| Delay start function | Yes, up to 24 h |
| Child lock | Yes |
| Drum volume (L) | 55 |
| Power supply | 220-240 V, 50 Hz |
| Type of motor | Inverter |
| Water supply | Cold water only |
| Installation type | Freestanding |
Frequently Asked Questions - KFWM I 6404 W Kernau
How do I reset my Kernau KFWM I 6404 W washing machine?
To reset the machine, turn it off and unplug it for 5 minutes. Then plug it back in and select the Drain and Spin programme to clear any residual water. If the error persists, contact customer support.
What does error code E10 mean?
E10 typically indicates a water supply problem. Check that the water tap is open, the inlet hose is not kinked, and the water pressure is adequate. Clean the inlet filter at the back of the machine.
How should I clean the detergent drawer?
Remove the drawer by pulling it out and pressing the release catch. Rinse it under warm water and use a brush to remove detergent residue. Clean the recess with a damp cloth. Do this monthly.
Can I connect the washing machine to hot water?
This model is designed for cold water connections only. Connecting to hot water can damage the programmes and increase energy consumption, as the machine is fully controlled by its internal heater.
How do I maintain the door seal to prevent mold?
Wipe the door seal and glass after every wash with a dry cloth. Leave the door slightly open to allow air circulation. Use a diluted vinegar solution to clean the seal thoroughly once a month.
What is the maximum load for a cotton programme?
The maximum load for a cotton programme is 6 kg of dry laundry. Do not overload the drum, as it may cause poor washing results and damage the bearings.
How can I activate the child lock?
Press and hold the Child Lock button for 3 seconds until the indicator lights up. To deactivate, press and hold again for 3 seconds. This prevents accidental changes during a cycle.
Why is my drum not rotating?
If the drum is not rotating, check if the machine is in pause or child lock mode. Also check for a blocked drum due to small items caught between the drum and the seal. The drive belt might be broken – in that case, call a technician.
How often should I descale the washing machine?
Descaling should be done every 3 to 6 months, depending on water hardness. Use a special descaling agent or citric acid, and run an empty hot cycle at 90°C. Refer to the user manual for specific advice.
How do I install the washing machine correctly?
Place the machine on a stable and level surface, away from direct sunlight and heat sources. Connect the inlet hose to a water tap with a 3/4" thread, and insert the drain hose securely into a standpipe. Remove all transport bolts before use.
User questions about KFWM I 6404 W Kernau
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual KFWM I 6404 W - Kernau and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KFWM I 6404 W by Kernau.
USER MANUAL KFWM I 6404 W Kernau
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kernau
Model : KFWM I 6404 W
Category : Washing machine