SuperServer 1029UZ-TN20R25M - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 1029UZ-TN20R25M Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 1U Rack |
| Processor Support | Dual Intel Xeon Scalable processors (Socket LGA 3647) |
| Chipset | Intel C622 |
| Memory Capacity | Up to 3TB DDR4 ECC Registered, 24 DIMM slots |
| Storage Bays | 8x 2.5" hot-swap drive bays with SAS3/NVMe support |
| Network Connectivity | 2x 10GbE SFP+ and 2x 25GbE ports |
| Expansion Slots | 2x PCIe 3.0 x16 low-profile slots |
| Management Interface | ASPEED AST2500 IPMI with dedicated LAN |
| Power Supply | Redundant 1000W Platinum power supplies (1+1) |
| Cooling System | 4x 4cm hot-swap fans with redundant fan support |
| Dimensions (W x D x H) | 437 x 650 x 43 mm (17.2 x 25.6 x 1.7 inches) |
| Weight | 16.8 kg (37 lbs) without drives |
| Maintenance and Cleaning | Regular air filter cleaning; use compressed air to remove dust from fans and heatsinks |
| Safety Precautions | Use ESD protection; ensure proper grounding and stable rack installation |
| Spare Parts and Repairability | Hot-swap components: drives, fans, power supplies; user-replaceable modules |
| General Information | Supermicro SuperServer series, ideal for data center and enterprise workloads |
Frequently Asked Questions - SuperServer 1029UZ-TN20R25M Supermicro
How do I configure the server for the first time?
Attach a monitor and keyboard, then power on. Press Del to enter the BIOS setup. Configure boot order, RAID settings, and IPMI as needed. Refer to the manual for detailed menu options.
What is the maximum memory capacity of the SuperServer 1029UZ-TN20R25M?
The server supports up to 3TB of DDR4 ECC Registered memory using 24 DIMM slots. Use populated memory modules to achieve optimal performance.
How do I install the server into a standard 19-inch rack?
Use the included rack rails. Extend the inner rails and attach them to the server sides. Slide the server into the rack and secure with screws. Ensure proper support for the weight.
Can I use NVMe drives with this server?
Yes, some drive bays support NVMe via PCIe lanes. Use compatible NVMe drives and configure them in the BIOS or RAID controller.
How do I reset the IPMI password?
Use the IPMI web interface as administrator, or use the IPMICFG utility in the OS. For a full reset, clear the CMOS and reboot the BMC.
What should I do if the server overheats?
Check that all fans are spinning, clean dust from vents, and ensure proper ambient temperature. Monitor via IPMI or BMC. Replace failed fans immediately.
How do I update the BIOS and firmware?
Download the latest files from Supermicro's website. Use the BIOS update utility or the IPMI with the "Update Firmware" option. Do not interrupt power during update.
How can I configure RAID on the onboard controller?
Enter the RAID BIOS (Ctrl+H or similar) during boot. Create RAID volumes, set hot spares, and initialize drives. Note that the motherboard may have a software RAID option.
What is the default IP address for IPMI?
By default, the IPMI is set to DHCP unless static is configured. To find it, press Ctrl+I during POST or use the LCD if available. Check your DHCP server logs.
How do I replace a failed power supply unit?
The supplies are hot-swappable. Pull the handle to release the PSU, slide it out, and insert a new one. Ensure the wattage matches the system requirement.
User questions about SuperServer 1029UZ-TN20R25M Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer 1029UZ-TN20R25M - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 1029UZ-TN20R25M by Supermicro.