VG4‑SFPSCKT - Uncategorized BOSCH - Free user manual and instructions
Find the device manual for free VG4‑SFPSCKT BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SFP socket kit for Bosch VG4 modular surveillance cameras |
| Brand | Bosch |
| Model | VG4-SFPSCKT |
| Compatibility | Bosch VG4 modular camera series |
| Intended Use | Adds fiber-optic connectivity to compatible camera housings |
| Interface | 1 x SFP cage/PCB socket |
| Connector Type | SFP/LC duplex fiber with compatible SFP module |
| Supported Data Rate | 100 Mbps or 1 Gbps depending on installed SFP module |
| Fiber Mode | Singlemode or multimode via interchangeable SFP modules |
| Operating Temperature | -30°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Dimensions (approx) | 80 x 35 x 15 mm |
| Weight (approx) | 40 g |
| Material | Nickel-plated shielded metal cage, FR4 circuit board |
| Power | Powered by host device, no external supply needed |
| Protection | Built-in ESD protection, RoHS compliant |
| Mounting | Fits on camera PCB or designated bracket; screws included |
| Maintenance | Clean with dry lint-free cloth; no solvents required |
| Safety | Installation by qualified personnel; follow local electrical codes |
| Spare Parts / Repairability | SFP module replaceable; socket assembly intended for long service life |
Frequently Asked Questions - VG4‑SFPSCKT BOSCH
What is the Bosch VG4-SFPSCKT?
The Bosch VG4-SFPSCKT is a replacement or upgrade SFP socket kit designed for Bosch VG4 series camera systems. It provides a shielded cage and PCB connector for installing an SFP fiber-optic transceiver module.
Is the VG4-SFPSCKT compatible with my Bosch VG4 camera?
The kit is designed for the Bosch VG4 modular camera series. Check your camera housing or main PCB for a dedicated SFP socket footprint and consult the installation sheet for exact models.
Which SFP modules can be used with this socket?
The socket accepts standard Small Form-factor Pluggable (SFP) modules. Use a module that matches your network speed and fiber type to ensure reliable operation.
Does the socket work with singlemode or multimode fiber?
Both can be used. The socket itself is fiber-mode independent; the SFP module determines whether the link is singlemode or multimode.
What data rates are supported?
The socket is rated for standard Ethernet speeds up to 1 Gbps depending on the installed SFP module. 100 Mbps modules also work without modification.
Can I install the VG4-SFPSCKT myself?
Installation should be performed by a qualified technician because it involves opening the camera housing and connecting to a PCB. Use the included screws and follow antistatic procedures.
How should I clean and maintain the SFP socket?
Keep the cage and contacts free of dust. Use dry, lint-free cloth or compressed air for the exterior; never apply solvents or water to electrical contacts.
Does the socket require an external power supply?
No. The socket is powered by the host camera or enclosure through the PCB connector. It has no separate power input.
What should I check if the fiber link is not working?
First verify that the SFP module is fully seated. Then check the fiber connectors, network settings, and whether the camera’s firmware supports the selected module speed.
Where can I find the installation and setup instructions?
The complete manual is available for download in PDF format on the Bosch product page. It includes mounting details, pinout diagrams, and technical specifications.
User questions about VG4‑SFPSCKT BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VG4‑SFPSCKT - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VG4‑SFPSCKT by BOSCH.