LTC 9215/00S - Uncategorized BOSCH - Free user manual and instructions
Find the device manual for free LTC 9215/00S BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Model | LTC 9215/00S |
| Brand | Bosch |
| Dimensions (W x H x D) | 150 mm x 120 mm x 100 mm |
| Weight | 1.2 kg |
| Power Supply | 12 V DC or PoE (802.3af) |
| Power Consumption | 8 W |
| Image Sensor | 1/3-inch CMOS |
| Resolution | 1920 x 1080 (Full HD) |
| Day/Night Function | Yes, with IR cut filter |
| IR Range | Up to 30 m |
| Lens Type | Fixed, 3.6 mm |
| Field of View | 90° horizontal |
| Video Compression | H.265, H.264, MJPEG |
| Network Interface | 10/100 Base-T, RJ45 |
| Supported Protocols | TCP/IP, UDP, HTTP, RTP, RTSP |
| Operating Temperature | -20°C to 50°C |
| Protection Rating | IP66 (weatherproof) |
| Mounting | Wall or ceiling mount bracket included |
| Maintenance | Clean lens with a soft, dry cloth |
| Safety | Use only with approved power supply; follow local regulations |
| Spare Parts & Repairability | Contact Bosch service center for genuine parts |
| General Information | Indoor/outdoor use, vandal-resistant housing |
Frequently Asked Questions - LTC 9215/00S BOSCH
How do I install the Bosch LTC 9215/00S camera?
Mount the camera using the included bracket. Connect the Ethernet cable for PoE or use a 12V DC power supply. Ensure the camera is within the range of your network.
How do I reset the camera to factory defaults?
Press and hold the reset button (located on the camera) for 10 seconds. The camera will reboot with default settings.
What is the default IP address and how do I access the camera?
The default IP address is 192.168.1.168. Use a web browser and enter the IP. Default username is 'admin' and password is 'admin' (or blank). Change them upon first login.
How do I set up motion detection?
Access the camera's web interface, go to 'Alarm' > 'Motion Detection'. Enable it and draw detection areas. Adjust sensitivity and schedule as needed.
Can I use this camera with an NVR?
Yes, the camera supports ONVIF Profile S and can be added to any compatible NVR. Ensure both are on the same network segment.
What should I do if the camera image is blurry?
Clean the lens with a soft cloth. Check the focus adjustment ring. Ensure the camera is not obstructed by debris or condensation.
How far can the IR illumination reach?
The built-in IR LEDs provide visibility up to 30 meters in complete darkness.
Is the camera suitable for outdoor use?
Yes, it has an IP66 rating, making it weatherproof and suitable for both indoor and outdoor installations.
How do I update the firmware?
Download the latest firmware from Bosch's website. In the camera web interface, go to 'Maintenance' > 'Firmware Upgrade' and upload the file.
What is the warranty period for this camera?
Bosch typically offers a 2-year warranty. Contact your dealer or Bosch support for specific terms.
User questions about LTC 9215/00S BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LTC 9215/00S - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LTC 9215/00S by BOSCH.
USER MANUAL LTC 9215/00S BOSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSCH
Model : LTC 9215/00S
Category : Uncategorized