HAGER

FWB52N - Switch HAGER - Free user manual and instructions

Find the device manual for free FWB52N HAGER in PDF.

📄 119 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HAGER FWB52N - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wireless push-button switch
Model FWB52N
Brand Hager
Mounting Wall-mounted (flush or surface)
Number of Channels 2 independent control channels
Power Supply Battery 3V CR2032 (included)
Battery Life Approximately 5 years under normal use
Wireless Protocol Hager proprietary radio protocol (868 MHz)
Wireless Range Up to 100 m in open field, 20-30 m indoors
Switching Function On/off, push-button, and scene control via paired actuators
LED Indicator Yes, for status and pairing feedback
Dimensions 80 × 80 × 42 mm (L × W × D)
Weight 80 g (including battery)
Protection Rating IP20 (indoor use only)
Safety Class Class II (double insulated)
Operating Temperature -10°C to +45°C
Compatibility Hager wireless actuators and receiver modules (e.g., FWW series)
Maintenance Clean with a soft, dry cloth; avoid water and solvents
Repairability Replaceable battery; no user-serviceable internal parts
Installation By qualified electrician; follow wiring and mounting instructions

Frequently Asked Questions - FWB52N HAGER

Does the Hager FWB52N require a neutral wire or wired connection?
No, the FWB52N is a wireless push-button switch powered by a battery. It does not require a neutral wire or any wired connection to the mains. It communicates via a proprietary 868 MHz radio protocol.
How do I pair the FWB52N with a Hager actuator or receiver?
To pair, first activate the pairing mode on your compatible Hager actuator (e.g., FWW series). Then press and hold the button on the FWB52N for about 5 seconds until the LED flashes. The devices will connect automatically. Refer to the manual for detailed steps.
What type of battery does the FWB52N use and how long does it last?
The FWB52N uses a CR2032 3V lithium battery. Under normal usage, the battery lasts up to 5 years. When the LED blinks red or the switch stops responding, the battery needs replacing.
Can the FWB52N control multiple receivers or create scenes?
Yes, the FWB52N can be paired to multiple Hager receivers or actuators, allowing you to control groups of lights or devices. It also supports scene control when configured with compatible Hager home automation systems.
Is the Hager FWB52N waterproof?
No, the FWB52N has an IP20 rating, which means it is only suitable for dry indoor locations. Do not install it outdoors or in humid areas such as bathrooms unless placed in an appropriate IP-rated enclosure.
Does the FWB52N work with Zigbee, Z-Wave, or other smart home systems?
The FWB52N uses Hager's proprietary wireless protocol and is not directly compatible with Zigbee, Z-Wave, or Wi-Fi systems. It works only with Hager wireless receivers and suitable gateways.
Can I use the FWB52N as a dimmer?
No, the FWB52N is a switching/push-button device, not a dimmer. It sends on/off commands, but if you need dimming, you must pair it with a compatible Hager dimmer actuator and ensure the button configuration supports multi-press or hold commands.
What is the wireless range of the FWB52N?
The wireless range is approximately 100 meters in open space and 20-30 meters indoors, depending on walls and obstacles. Thick concrete walls or metal frames can reduce the range significantly.
How do I replace the battery in the FWB52N?
To replace the battery, gently pry open the front cover using a small flat-head screwdriver. Remove the old CR2032 battery and insert a new one, observing the correct polarity (+ facing up). Close the cover and test the switch.
Is professional installation required for the FWB52N?
Because the FWB52N is battery-powered and wireless, it is easier to install than wired switches. However, if you are installing it as part of a mains-connected actuator system, it is recommended to consult a qualified electrician to ensure safe and compliant installation.

User questions about FWB52N HAGER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Switch in PDF format for free! Find your manual FWB52N - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FWB52N by HAGER.

USER MANUAL FWB52N HAGER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HAGER

Model : FWB52N

Category : Switch