JPD2400M20DW - Switch HAGER - Free user manual and instructions
Find the device manual for free JPD2400M20DW HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Switch |
| Brand | Hager |
| Model | JPD2400M20DW |
| Dimensions (H x W x D) | 86 x 86 x 40 mm |
| Weight | 100 g |
| Color | White |
| Material | Polycarbonate (PC) |
| Rated Voltage | 230 V AC |
| Rated Current | 10 A |
| IP Protection | IP20 |
| Installation Type | Flush mounting (wall box) |
| Number of Gangs | 1 |
| Switch Function | On/Off |
| Illumination | No |
| Terminal Type | Screw terminals |
| Operating Temperature | -5°C to +40°C |
| Certifications | CE, RoHS |
| Warranty | 2 years |
| Included Accessories | Screws and mounting instructions |
| Compatibility | Standard 86 mm wall boxes |
Frequently Asked Questions - JPD2400M20DW HAGER
What tools are needed to install the Hager JPD2400M20DW switch?
You will need a flathead screwdriver, voltage tester, and possibly a wire stripper. Ensure power is off before installation.
Can this switch be used for lighting control in a bathroom?
The JPD2400M20DW has an IP20 rating, making it suitable for dry indoor areas. It should not be installed in bathrooms or wet locations unless protected by an appropriate enclosure.
How do I wire the Hager switch?
Connect the live wire to one terminal, and the load wire to the other. The earth wire is not connected directly to the switch but must be properly grounded in the wall box.
What is the maximum load for this switch?
The maximum load is 10 A at 230 V AC, which corresponds to approximately 2300 watts for resistive loads. For inductive loads, derate accordingly.
Is the Hager JPD2400M20DW compatible with smart home systems?
No, this is a standard mechanical switch without smart features. It cannot be directly integrated with smart home systems.
How do I remove the switch from the wall?
First, turn off the power. Then, gently pry off the cover plate with a flathead screwdriver. Unscrew the mounting screws to release the switch from the wall box.
Can I use this switch for a ceiling fan?
Yes, as long as the fan's current draw does not exceed 10 A. Ensure the fan is rated for 230 V AC.
What should I do if the switch feels loose after installation?
Tighten the mounting screws behind the cover plate. If the wall box is damaged, use appropriate anchors to secure it.
Is this switch dimmable?
No, the JPD2400M20DW is a standard on/off switch. It does not have dimming functionality.
How do I clean the switch?
Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or immerse in water.
User questions about JPD2400M20DW HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual JPD2400M20DW - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JPD2400M20DW by HAGER.
USER MANUAL JPD2400M20DW HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : JPD2400M20DW
Category : Switch