CAS500R - Fireplace DIMPLEX - Free user manual and instructions
Find the device manual for free CAS500R DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fireplace |
| Installation Type | Built-in / Recessed |
| Heating Technology | Fan-forced convection heater |
| Heat Output (Maximum) | 2 kW (adjustable thermostat) |
| Power Settings | Two heat levels (low/high) plus flame-only mode |
| Voltage / Frequency | 230 V / 50 Hz |
| Control Methods | Manual controls, remote control, and thermostat |
| Display / Interface | LED indicator lights and digital thermostat display |
| Flame Effect | Realistic LED flame effect with adjustable brightness |
| Additional Ambiance | Optional glowing ember bed and logs |
| Safety Features | Overheat protection, cool touch glass, and safety cut-off |
| Dimensions (Approx.) | Width: 500 mm, Height: 400 mm, Depth: 150 mm |
| Cut-out Dimensions | Width: 460 mm, Height: 360 mm, Depth: 140 mm |
| Weight (Approx.) | 10 kg |
| Framing / Trim | Elegant black metallic finish with slim bezel |
| Fuel Included | Logset with realistic ceramic logs |
| Installation Requirements | Standard electrical connection, no chimney or vent needed |
| Maintenance | Wipe exterior with a soft dry cloth; clean glass with mild glass cleaner |
| Spare Parts Availability | Remote control, heating element, glass panel, and log set are replaceable |
| Certifications | CE marked and compliant with European safety standards |
Frequently Asked Questions - CAS500R DIMPLEX
How do I install the CAS500R fireplace?
The CAS500R is designed for built-in installation. Prepare a recess with dimensions of at least 460 mm wide, 360 mm high, and 140 mm deep. Ensure a standard electrical outlet is accessible. Slide the unit into place and connect the power. Refer to the installation section of the manual for detailed diagrams.
Can I operate the fireplace without heating?
Yes, you can use the flame-only mode to enjoy the realistic visual effects without additional heat. Simply select the flame-only setting on the control panel or remote control while turning the heater off.
What is the recommended cleaning procedure?
Before cleaning, always switch off the fireplace and unplug it. Use a soft, damp cloth to wipe the exterior. For the glass, apply a mild glass cleaner with a lint-free cloth. Avoid abrasive pads that might scratch the surface. Do not use water directly on the heater.
Does the CAS500R require a chimney or vent?
No, this is an electric fireplace with a closed unit, so it does not produce real smoke or emissions. It can be installed in any room with access to a standard power socket. No venting or chimney structure is required.
How do I replace the remote control battery?
The remote control uses a common button cell battery (typically CR2025). Slide the battery compartment open, replace the battery with the correct polarity, and close the compartment. If the remote fails, check the battery first.
What are the thermostat settings?
The thermostat allows you to set a desired room temperature between 15°C and 30°C. The heater will automatically switch on or off to maintain this temperature. You can adjust it using the up/down buttons on the unit or the remote.
Is the fireplace safe for use around children?
Yes, the unit features a cool-touch glass and an overheat protection system. However, it is still an electrical appliance. Always supervise children and avoid touching the heater during operation. The glass may become warm but not dangerously hot.
What should I do if the fireplace does not heat up?
First, check that the power plug is securely connected and the socket is working. Ensure the thermostat is set higher than the room temperature. If the unit still does not heat, inspect the heating element for visible damage. Contact qualified service personnel for replacement.
Can I paint the outer frame?
The frame is finished with a high-temperature paint, but it is not recommended to repaint it. Painting may affect the appearance and could void the warranty. If you wish to change the finish, consider using a removable magnetic frame cover.
What is the power consumption in flame-only mode?
In flame-only mode, the unit consumes approximately 20 watts, ideal for creating ambiance without significant energy use. The maximum heating mode draws about 2 kW, which is normal for an electric heater of this size.
User questions about CAS500R DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fireplace in PDF format for free! Find your manual CAS500R - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CAS500R by DIMPLEX.
USER MANUAL CAS500R DIMPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DIMPLEX
Model : CAS500R
Category : Fireplace