Revillusion RBF42C-AU - Fireplace DIMPLEX - Free user manual and instructions
Find the device manual for free Revillusion RBF42C-AU DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fireplace |
| Model | Revillusion RBF42C-AU |
| Brand | Dimplex |
| Installation Style | Built-in / Recessed |
| Width | 42 inches (106.7 cm) |
| Height | 17.75 inches (45.1 cm) |
| Depth | 6.5 inches (16.5 cm) |
| Weight | 45 lb (20.4 kg) |
| Power Supply | 220-240 V AC, 50/60 Hz |
| Heater Wattage | 1500 W (approximately 5,100 BTU) |
| Heating Capacity | Up to 400 sq ft (37 m²) |
| Flame Technology | Revillusion™ LED flame with realistic ember bed |
| Remote Control | Yes, with ON/OFF, heat, flame brightness and thermostat |
| Thermostat | Adjustable, with digital display |
| Timer | Programmable, 0.5 – 8 hours |
| Safety Features | Overheat protection, cool-touch glass, auto shut-off |
| Maintenance | Wipe exterior with soft dry cloth; no internal lubrication |
| Spare Parts & Repairability | Replacement parts available through Dimplex service centers |
| Warranty | 1-year limited warranty |
| Certifications | ETL / UL approved (typical) |
Frequently Asked Questions - Revillusion RBF42C-AU DIMPLEX
How does the <b>Revillusion</b> flame technology create a realistic fire?
The Revillusion flame system uses advanced LED lights and a patented lens to create a layered, lifelike flame effect. It projects light onto the ember bed and deflectors, producing a deep, vibrant flame that cannot be easily distinguished from a real fire. The effect can be operated with or without heat.
Can I run the fireplace flame effect without the heater?
Absolutely. The RBF42C-AU is designed to allow independent operation of the flame and heater. Use the remote or panel controls to set the flame to ON and keep the heater OFF, giving you a cozy ambience year-round.
What are the installation requirements for this built-in fireplace?
The RBF42C-AU is designed for recessed installation into a wall or mantel. It requires a 42-inch wide opening with adequate clearance. Ensure the framing is non-combustible and follow local electrical codes. A dedicated 15-amp circuit is recommended. Clearance to side and top should be at least 2 inches.
How should I clean the glass and exterior?
Unplug the fireplace and allow all surfaces to cool completely. Use a soft, slightly damp cloth to wipe the exterior and glass. Do not use abrasive cleaners or chemical sprays. The interior does not require regular cleaning. Keep the vents free of dust and debris.
Is the glass cool enough to touch during operation?
The fireplace is equipped with cool-touch glass technology. Although the heat vents emit warm air, the front glass remains cool to the touch, making it safe around children and pets. Always supervise young children when the heater is in use.
Can I place a television above the fireplace?
Yes, but maintain the minimum clearance and heat zone. The RBF42C-AU is specifically designed for media installations. Ensure the TV is installed according to the fireplace and TV manufacturer's specifications, and allow at least 12 inches between the fireplace top and TV bottom to avoid heat damage.
What type of batteries does the remote control use?
The remote control requires two AAA alkaline batteries (not included). Open the battery compartment on the back, insert the batteries with correct polarity, and replace the cover. If the remote stops working, check/replace the batteries and ensure there are no obstructions.
What should I do if the heater emits a burning smell when first used?
A mild burning odor for the first few minutes of use is normal as the heating elements burn off dust and manufacturing oils. Run the heater on maximum for 15–20 minutes in a well-ventilated room. If the smell persists or you see smoke, turn off the unit and contact Dimplex customer support.
How do I adjust the flame brightness and color?
Use the flame intensity button on the control panel or remote to cycle through five brightness levels. Some Revillusion models allow you to select different ember bed colors. Refer to the manual for specific button layout and modes.
Are spare parts available for the RBF42C-AU?
Yes. Dimplex provides genuine replacement parts such as LED light modules, remote controls, and heater assemblies through authorized service centers. Always order with the model number to ensure compatibility. Many parts can be replaced by a qualified professional without replacing the entire unit.
User questions about Revillusion RBF42C-AU DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fireplace in PDF format for free! Find your manual Revillusion RBF42C-AU - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Revillusion RBF42C-AU by DIMPLEX.
USER MANUAL Revillusion RBF42C-AU DIMPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DIMPLEX
Model : Revillusion RBF42C-AU
Category : Fireplace