500734-SM10 - Audio/video extension MuxLab - Free user manual and instructions
Find the device manual for free 500734-SM10 MuxLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Audio/video extender |
| Brand | MuxLab |
| Model | 500734-SM10 |
| Signal type | HDMI |
| Supported resolution | 4K UHD @ 30Hz |
| HDCP compliance | HDCP 2.2 |
| Transmission distance | Up to 50 m over Cat5e/6 |
| Cable type | Single Cat5e/6 |
| IR control | Yes, with IR emitter and receiver |
| Power supply | 5V DC, 1A adapter |
| Power consumption | Less than 2W |
| Dimensions (W x H x D) | 90 x 25 x 70 mm |
| Weight | 200 g (total) |
| Enclosure material | Aluminum |
| Operating temperature | -10°C to 50°C |
| Installation | Plug-and-play, no drivers needed |
| Function | Extends audio and video signals over a single network cable |
| Maintenance | Keep the device clean and dry; wipe with a soft cloth |
| Safety | CE and RoHS compliant |
| Repairability | Modular design, cables are detachable |
| Package contents | Transmitter, receiver, 2 power adapters, IR emitter, IR receiver, user manual |
Frequently Asked Questions - 500734-SM10 MuxLab
What cable is required for the MuxLab 500734-SM10?
The MuxLab 500734-SM10 uses a single Cat5e/6 cable to transmit audio and video signals up to 50 meters.
Does this extender support 4K resolution?
Yes, the 500734-SM10 supports 4K UHD at 30Hz with HDCP 2.2 for protected content.
How do I power the transmitter and receiver?
Both the transmitter and receiver are powered using the included 5V DC adapters. Connect each unit to a power source.
Can I control my source device remotely with this extender?
Yes, the package includes an IR emitter and receiver, allowing you to control an IR-enabled source from the display location.
Is the MuxLab 500734-SM10 compatible with all HDMI devices?
It works with HDMI 1.4 and newer devices with HDCP 2.2, including Blu-ray players, game consoles, laptops, and set-top boxes.
What is the maximum transmission distance?
The maximum distance is 50 meters when using Cat6 cable; for Cat5e the distance may be slightly less.
Does the extender require any software installation?
No, the unit is plug-and-play. Simply connect the cables and power on the devices.
Can I use the extender with a non-HDMI source?
The device is designed exclusively for HDMI sources. For other formats, you would need a converter.
How do I clean the MuxLab 500734-SM10?
Use a soft, dry cloth to wipe the housing. Avoid solvents and liquids to prevent damage.
What should I do if there is no video signal?
Check all HDMI and Cat5e/6 connections, ensure the power adapters are plugged in, and verify the source output is active. Try a shorter cable or a different HDMI port.
User questions about 500734-SM10 MuxLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video extension in PDF format for free! Find your manual 500734-SM10 - MuxLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 500734-SM10 by MuxLab.
USER MANUAL 500734-SM10 MuxLab
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MuxLab
Model : 500734-SM10
Category : Audio/video extension