500536 - Audio/video extension MuxLab - Free user manual and instructions
Find the device manual for free 500536 MuxLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Extender |
| Model Number | 500536 |
| Brand | MuxLab |
| Dimensions (WxDxH) | 100 x 80 x 25 mm |
| Weight | 200 g |
| Power Supply | 5V DC, 1A (adapter included) |
| Power Consumption | 2.5W max |
| Video Resolution | Up to 1080p@60Hz |
| Transmission Distance | Up to 50 meters (164 ft) via Cat5e/6 |
| Connector Types | HDMI (input and output), RJ45 (for extension) |
| Supported Audio | Stereo PCM, Dolby Digital, DTS |
| IR Pass-through | Yes (for remote control extension) |
| HDCP Support | Yes, HDCP 1.4 compliant |
| Bandwidth | 4.95 Gbps (single link) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | Up to 90% non-condensing |
| Installation | Plug-and-play, no driver required |
| Maintenance | Keep dry and dust-free; clean with a soft, dry cloth |
| Safety Precautions | Use with surge protector; do not expose to moisture |
| Spare Parts | Not available; device is not user-serviceable |
| Repairability | Repair should be performed by qualified technician |
| Warranty | 1 year from date of purchase |
Frequently Asked Questions - 500536 MuxLab
How do I set up the MuxLab 500536 extender?
Connect the HDMI source to the transmitter unit using an HDMI cable. Connect the receiver unit to the display via HDMI. Then, connect the transmitter and receiver with a Cat5e/6 cable (up to 50m). Power both units with the included 5V adapters. No drivers required.
What is the maximum distance supported?
The extender supports up to 50 meters (164 feet) when using Cat5e/6 cable. For longer distances, use a higher grade cable or a repeater.
Does it support 4K resolution?
No, the 500536 supports up to 1080p@60Hz. For 4K, consider a different MuxLab model.
Can I use this extender with my IR remote?
Yes, the extender has IR pass-through. Connect the included IR emitter and receiver cables to control your source device from the display location.
What kind of cable do I need between the transmitter and receiver?
Use a Cat5e or Cat6 Ethernet cable with straight-through wiring. Shielded cable is recommended for long runs and noisy environments.
Why is there no video output?
Check all cable connections, ensure both units are powered, and verify the HDMI source and display are on. Also confirm the Ethernet cable is good and not longer than 50m. Try a different HDMI source or display.
Is this extender compatible with all HDMI devices?
It works with most HDMI sources and displays that support 1080p and HDCP 1.4. Some older devices may have compatibility issues. Ensure your source and display support HDCP.
Does it require any software or drivers?
No, the extender is plug-and-play. It does not require any drivers or software configuration.
Can I connect multiple displays using one transmitter?
No, the 500536 is a point-to-point extender. For multiple displays, you would need a splitter or a matrix extender.
How do I clean and maintain the extender?
Keep the units in a dry, dust-free environment. To clean, use a soft, dry cloth. Do not use liquids or abrasives. Avoid exposing to extreme temperatures.
User questions about 500536 MuxLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video extension in PDF format for free! Find your manual 500536 - MuxLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 500536 by MuxLab.
USER MANUAL 500536 MuxLab
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MuxLab
Model : 500536
Category : Audio/video extension