CT62B - Thermostat HONEYWELL - Free user manual and instructions
Find the device manual for free CT62B HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermostat for electric heating |
| Brand | Honeywell |
| Model | CT62B |
| Compatibility | Electric baseboard heaters, radiant ceiling, and convection heaters |
| Voltage Rating | 120-240 VAC |
| Maximum Load | 22 A (resistive) |
| Switch Type | Single-pole double-throw (SPDT) |
| Temperature Range | 40°F to 80°F (5°C to 27°C) |
| Control Type | Mechanical bimetallic |
| Mounting | Wall mount, flush or surface |
| Wire Connection | Screw terminals |
| Dimensions | 3.0" H x 3.0" W x 1.3" D (approx.) |
| Weight | 0.25 lb (approx.) |
| Certifications | UL listed |
| Warranty | 1 year limited |
| Repair & Spare Parts | No user-serviceable parts; replace unit if defective |
| Cleaning | Wipe with a dry cloth; do not use water or solvents |
| Safety | Do not install near flammable materials; follow local electrical codes |
Frequently Asked Questions - CT62B HONEYWELL
How do I wire the Honeywell CT62B thermostat?
Turn off power at the circuit breaker. Connect the line (hot) wires to the terminal screws, and the load wires to the other terminal. Use the screw terminals and tighten securely. Ensure all connections meet local electrical codes.
Can this thermostat control a 240V baseboard heater?
Yes, the CT62B is rated for 120-240 VAC and can control a resistive heater up to 22 A, making it suitable for most baseboard heaters.
What is the maximum wattage the CT62B can handle?
At 240V, the maximum load is 22 A, so it can handle up to 5280 watts (240V × 22A). At 120V, it handles up to 2640 watts.
How do I set the desired temperature?
Turn the dial on the thermostat to your desired temperature. The dial is marked in degrees Fahrenheit, with a range from 40°F to 80°F. The mechanical bimetallic sensor responds to room temperature changes.
How should I clean the thermostat?
Wipe the exterior with a dry, soft cloth. Never use water, solvents, or abrasive cleaners. Avoid spraying liquids directly onto the unit.
What should I do if the heater doesn't turn on?
First, check that the circuit breaker is on. Then verify the thermostat is set above room temperature. If it still doesn't work, turn off power and inspect the wiring connections. If the thermostat is defective, it must be replaced; there are no user-serviceable parts.
Can I use the CT62B for cooling or with a heat pump?
No, this thermostat is designed only for electric resistance heating. It is not suitable for cooling systems, heat pumps, or low-voltage (24V) HVAC systems.
Is the CT62B programmable?
No, it is a non-programmable mechanical thermostat. It maintains a single set point until manually changed. For programmable schedules, consider a digital model.
How do I mount the thermostat?
The CT62B can be mounted on a standard junction box (flush) or directly on the wall surface. Use the included screws, and make sure it is level. Route wires through the opening and connect to the terminals.
Is there a warranty?
Honeywell provides a 1-year limited warranty against defects in materials and workmanship. Keep your receipt for proof of purchase.
User questions about CT62B HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermostat in PDF format for free! Find your manual CT62B - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CT62B by HONEYWELL.
USER MANUAL CT62B HONEYWELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HONEYWELL
Model : CT62B
Category : Thermostat