SUB-2 - Musical instrument Vevor - Free user manual and instructions
Find the device manual for free SUB-2 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Active subwoofer for PA |
| Brand | Vevor |
| Model | SUB-2 |
| Category | Musical instrument / sound reinforcement |
| Dimensions (W × H × D) | 28 cm × 32 cm × 35 cm |
| Net weight | 8.2 kg |
| Power supply | Mains 220-240 V ~ 50 Hz |
| RMS power | 200 W |
| Peak power | 400 W |
| Speaker | 8 inches, 4 ohms |
| Frequency response | 40 Hz - 200 Hz |
| Input connections | RCA line input and speaker input |
| Output connections | Speaker output for satellite |
| Controls | Volume, phase 0°/180°, variable crossover |
| Features | Auto power-off, thermal and short-circuit protection |
| Care and cleaning | Wipe with a soft dry cloth |
| Safety | Do not expose to moisture, respect mains polarity |
| Spare parts | Replacement fuse, standard power cord |
| Repairability | Removable rear panel, accessible speaker |
| General information | Indoor use, place on a stable surface |
Frequently Asked Questions - SUB-2 Vevor
How to connect the SUB-2 subwoofer to an amplifier?
Use an RCA line input or a speaker connection. Connect your amplifier's output to the subwoofer input, then plug the satellite speakers into the SUB-2's speaker output.
What type of power cable is suitable?
The Vevor SUB-2 uses a standard 220-240V power cord with IEC connector. Any outlet is designed for mains connection.
Can I use the SUB-2 outdoors?
It is designed for indoor use. Do not use it in rain or a humid environment to avoid any electrical risk.
How to adjust the volume and phase on the subwoofer?
Adjust the volume for balance with the satellites. The phase switch (0°/180°) aligns the subwoofer with the main speakers. Choose the position that gives the most natural sound.
What to do if the subwoofer goes into automatic protection?
Check that the fuse is not blown, the ventilation is not blocked, and the wiring is correct. If the indicator remains red, contact technical support.
How to clean the Vevor SUB-2?
Unplug the device before cleaning. Use a soft, dry cloth to remove dust. Never use solvents or abrasive products.
Does the SUB-2 have an output for a second subwoofer?
No, the SUB-2 model does not have a dedicated output for a chain of subwoofers. You can use an RCA splitter to feed a second subwoofer if necessary.
What crossover settings are available?
The crossover is variable from 80 to 120 Hz. Turn the knob to adjust the cutoff frequency according to your speakers and musical taste.
Is the SUB-2 compatible with a mixing console?
Yes, you can connect the MAIN OUT output of your mixing console to the RCA line input of the subwoofer, using an appropriate adapter or cable.
How to replace the subwoofer fuse?
Unplug the subwoofer. The fuse holder is located near the power input. Use a screwdriver to open the cap, remove the old fuse, and install an identical fuse (values indicated on the device).
User questions about SUB-2 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Musical instrument in PDF format for free! Find your manual SUB-2 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SUB-2 by Vevor.
USER MANUAL SUB-2 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : SUB-2
Category : Musical instrument