FUS-SSD-2X4-E3S - Controller Sonnet - Free user manual and instructions
Find the device manual for free FUS-SSD-2X4-E3S Sonnet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PCIe SSD Controller Adapter |
| Brand | Sonnet |
| Model Number | FUS-SSD-2X4-E3S |
| Form Factor | Low-profile PCIe card |
| Host Interface | PCIe 4.0 x8 |
| Drive Support | 2x E3.S (EDSFF) SSD |
| Drive Data Transfer Rate | Up to 64 Gbps per slot (PCIe 4.0 x4) |
| Compatibility | Windows, macOS, and Linux systems with PCIe slot |
| Dimensions | 153.75 mm x 68.90 mm |
| Weight | 150 g (0.33 lb) |
| Power Consumption | 5 W typical |
| Cooling | Passive heatsink |
| Mounting Brackets | Full-height and low-profile included |
| LED Indicators | Power and drive activity per slot |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -10°C to 70°C (14°F to 158°F) |
| Regulatory Certifications | CE, FCC, RoHS |
| Warranty | 2-year limited |
Frequently Asked Questions - FUS-SSD-2X4-E3S Sonnet
What is the Sonnet FUS-SSD-2X4-E3S used for?
This controller adapter enables you to install two E3.S (EDSFF) solid-state drives in a desktop or server workstation, providing high-speed PCIe 4.0 NVMe storage.
Which operating systems are supported?
The FUS-SSD-2X4-E3S works with Windows, macOS, and Linux operating systems that include built-in NVMe driver support.
Does this card support hot-swapping?
No, the FUS-SSD-2X4-E3S does not support hot-swapping. Power off the system before installing or removing SSDs to prevent data loss.
What PCIe slot do I need?
You need a motherboard with an available PCIe 4.0 x8 or wider slot (x8 or x16 physical connector). The card is also backwards compatible with PCIe 3.0 slots, but speeds will be limited.
Does it come with cables?
No cables are required. The E3.S drives plug directly into the onboard connectors. The package includes low-profile and full-height brackets for installation.
What is the maximum storage capacity supported?
The maximum capacity depends on the E3.S SSDs you install. The controller supports any NVMe E3.S SSD, and capacity is only limited by the drives themselves.
How do I install the card?
First, power off and unplug the system. Open the case and insert the card into an available PCIe slot. Attach the appropriate bracket. Then insert the E3.S drives into the slots, secure them, and close the case. Power on and the drives should appear as NVMe devices.
Can I use standard M.2 SSDs with this card?
No, this card is specifically designed for E3.S (EDSFF) form factor drives. Standard M.2 SSDs are not physically compatible.
Is the card recommended for server use?
Yes, the FUS-SSD-2X4-E3S is suitable for both workstations and servers, offering high-density, low-latency NVMe storage and a low-profile design that fits most chassis.
What does the LED indicator mean?
The power LED indicates the card is receiving power, while the activity LEDs blink when data is being read from or written to the corresponding SSD.
User questions about FUS-SSD-2X4-E3S Sonnet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual FUS-SSD-2X4-E3S - Sonnet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FUS-SSD-2X4-E3S by Sonnet.
USER MANUAL FUS-SSD-2X4-E3S Sonnet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sonnet
Model : FUS-SSD-2X4-E3S
Category : Controller