TF7 - Uncategorized Navitel - Free user manual and instructions
Find the device manual for free TF7 Navitel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dash camera |
| Brand | Navitel |
| Model | TF7 |
| Display | 3-inch LCD screen |
| Video Resolution | Full HD 1080p (1920x1080) |
| Frame Rate | 30 fps |
| Viewing Angle | 170 degrees wide angle |
| Video Format | MP4 (H.264 compression) |
| Loop Recording | Yes, with automatic overwrite |
| G-Sensor | Built-in, locks files on impact |
| Night Vision | WDR and low-light enhancement |
| Parking Mode | Supports motion and collision detection |
| Memory Card Support | MicroSD up to 128 GB (not included) |
| Power Supply | 12-24 V car charger |
| Battery | Built-in rechargeable 180 mAh |
| Mount | Suction cup bracket |
| Dimensions | 90 x 50 x 40 mm |
| Weight | 80 g |
| Operating Temperature | -10°C to +60°C |
| Maintenance | Clean lens with soft dry cloth |
| Safety | Do not obstruct driver's view or airbags |
| Spare Parts | Replacement mount, cable, and adhesive pads available |
Frequently Asked Questions - TF7 Navitel
How do I set the date and time on the Navitel TF7?
Go to the settings menu, select Date/Time, then use the on-screen arrows to adjust the year, month, day, hour, and minute. Confirm with OK, and the device will apply the changes.
Can the TF7 record clear video at night?
Yes, the device is equipped with WDR technology and low-light enhancement, allowing it to capture readable footage even in dim conditions. Make sure the windshield is clean and the lens is free of smudges.
How do I insert a memory card into the Navitel TF7?
Power off the camera, open the card slot cover on the side, and insert a MicroSD card (up to 128 GB) with the metal contacts facing down until it clicks. Format the card in the device menu before first use.
What should I do if my TF7 does not turn on?
Check the car charger connection and cigarette lighter socket. Replace the fuse if needed. If the battery is completely drained, connect the charger for a few minutes. Press the power button for 3 seconds to boot.
How do I enable loop recording?
In the recording settings, select Loop Recording and choose a clip duration (1, 3, or 5 minutes). When the card is full, the camera will overwrite the oldest unprotected files automatically.
Is there a built-in GPS module in the Navitel TF7?
No, the TF7 is a standalone dash camera without GPS. It does not log location or speed data. For GPS tagging, you would need a model like the Navitel R2000 series.
How do I reset the TF7 to factory defaults?
Open the menu and find the Factory Reset option, then confirm. Alternatively, use a paperclip to press the small RESET button located on the side of the camera for 5 seconds.
Can I use parking mode to monitor my car while parked?
Yes, the TF7 supports parking mode. With the hardwire kit connected to the fuse box, the camera will automatically switch to motion detection and collision detection when the ignition is off.
What is the G-sensor and how does it work?
The G-sensor detects sudden acceleration or impact. When triggered, the current video file is marked as protected and will not be deleted by loop recording, ensuring critical footage is preserved.
How do I update the firmware on the Navitel TF7?
Download the latest firmware from the official Navitel website to a MicroSD card, then insert it into the camera. Power on and press the update prompt. Follow the on-screen instructions and do not disconnect power during the update.
User questions about TF7 Navitel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TF7 - Navitel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TF7 by Navitel.