COB Cannon LP200STX - Lighting American DJ - Free user manual and instructions
Find the device manual for free COB Cannon LP200STX American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | COB LED Par Light |
| Brand | American DJ |
| Model | COB Cannon LP200STX |
| Category | Lighting |
| Light Source | 1 x 200W COB LED |
| Beam Angle | 40 degrees |
| Color Temperature | 3200K - 5600K adjustable |
| Control Protocols | DMX512, Master/Slave, Sound Active, Auto Program |
| DMX Channels | 3 / 5 / 7 channel modes |
| Display | Digital LED display with menu buttons |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 220W maximum |
| Dimensions (L x W x H) | 425 x 265 x 415 mm |
| Weight | 8.5 kg |
| Housing Material | High-impact metal with scratch-resistant finish |
| Cooling System | Convection cooling with passive heat sinks |
| Mounting Options | Floor standing or hanging via mounting bracket |
| Connectors | 3-pin XLR DMX in/out, powerCON input/output |
| Maintenance & Cleaning | Disconnect power; use dry cloth on lens and housing; inspect fans and vents regularly |
| Safety Features | CE compliant; overheat protection; safety cable loop |
| Spare Parts & Repairability | Replaceable LED engine, power supply, and control board; service-friendly construction |
| Warranty | Standard manufacturer warranty (check local regulations) |
Frequently Asked Questions - COB Cannon LP200STX American DJ
How do I set the DMX address?
Press the MENU button to enter the main menu. Use the UP/DOWN buttons to select "DMX Address" mode, then press ENTER. Set the desired starting address with UP/DOWN and press ENTER to confirm. The DMX address must match the controller's setting for the fixture to respond correctly.
What are the different DMX channel modes?
The fixture supports 3-channel, 5-channel, and 7-channel modes. The 3-channel mode provides basic control of dimmer, color, and strobe. The 5-channel and 7-channel modes add more granular control over color temperature, fan speed, and additional effects. Select the desired mode in the DMX Mode menu.
How do I replace the fuse?
Always disconnect the power before checking or replacing the fuse. The fuse holder is on the rear panel near the power input. Use a screwdriver to open the fuse cap, remove the old fuse, and replace it with a fuse of the same type and rating (typically 3.15A 250V). Reinsert and close the cap securely.
How do I clean the fixture?
Disconnect the power and let the unit cool down completely. Use a soft, dry cloth to wipe the housing and the front lens. Do not use liquids or solvents. Regularly clean the fan openings and vents to prevent overheating and maintain optimal performance.
Can I use multiple fixtures in Master/Slave mode?
Yes. Connect the DMX cables between units. Set the first unit to Master mode, and all following units to Slave mode. The slave units will automatically synchronize with the master's built-in programs or the DMX signal received by the master.
What is the recommended safety distance?
Position the fixture at least 50 cm (about 20 inches) away from flammable materials and surfaces. Always ensure adequate ventilation around the unit and never block the air vents to prevent overheating.
How do I perform a factory reset?
Navigate to the Settings menu using the MENU button, select Reset, and confirm by pressing ENTER. The fixture will restart, and all settings will return to the factory defaults.
Does the fixture support RDM (Remote Device Management)?
No, the COB Cannon LP200STX does not support RDM. To set DMX addresses, use the on-board digital display and buttons. RDM is not available in any of the channel modes.
What is the power draw and voltage range?
The unit accepts a universal power input of 100-240V AC 50/60Hz and draws a maximum of 220W. This allows worldwide use without voltage conversion.
What is the LED lifespan and how can it be replaced?
The COB LED is rated for approximately 50,000 hours. In the unlikely event of failure, the LED module can be replaced by a qualified technician. Spare parts are available through American DJ authorized service centers.
User questions about COB Cannon LP200STX American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual COB Cannon LP200STX - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COB Cannon LP200STX by American DJ.
USER MANUAL COB Cannon LP200STX American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : COB Cannon LP200STX
Category : Lighting