Pixie Strip 30 - Lighting American DJ - Free user manual and instructions
Find the device manual for free Pixie Strip 30 American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | LED strip effect lighting |
| Brand | American DJ |
| Model | Pixie Strip 30 |
| Category | Lighting |
| Dimensions (W x H x D) | Approx. 30 x 2 x 3 inches (762 x 51 x 76 mm) |
| Weight | Approx. 7.5 lbs (3.4 kg) |
| Power supply | AC 100-240V, 50/60Hz |
| Power consumption | Approx. 90W |
| LED type | 30 x 3W RGB LEDs |
| DMX channels | 7 channels |
| Control modes | DMX, sound active, auto, master/slave |
| DMX connectivity | 3-pin XLR in/out |
| Beam angle | Approx. 30 degrees |
| Housing material | Aluminum |
| Cooling | Convection cooled |
| Mounting | Clamp or bracket with integrated yoke |
| Maintenance | Clean with a soft, dry cloth; avoid harsh chemicals |
| Safety features | Safety cable loop, anti-slip rubber pads |
| Spare parts | Available from authorized service centers |
| Repairability | Modular design allows easy replacement of LED modules |
| General information | Flicker-free operation, suitable for stages, nightclubs, and mobile DJs |
Frequently Asked Questions - Pixie Strip 30 American DJ
How do I set the DMX address on the Pixie Strip 30?
To set the DMX address, use the buttons on the rear panel to enter the DMX Mode, then adjust the starting address using the channel display and up/down buttons. Once set, the fixture will respond to the controller starting at that address.
Can the Pixie Strip 30 be used outdoors?
The Pixie Strip 30 is primarily designed for indoor use. To protect it from moisture and dust, place it under a covered area or use a protective housing. It is not rated as IP65, so prolonged outdoor exposure is not recommended.
How do I connect multiple Pixie Strip 30 fixtures in master/slave mode?
In master/slave mode, set the first fixture as the master and the others as slave. Connect them using standard DMX cables from the DMX out of the master to the DMX in of the next fixture. All slave fixtures will follow the master's built-in programs.
What is the power consumption of the Pixie Strip 30?
The approximate power consumption is 90 watts. It operates on AC 100-240V, making it compatible with most electrical supplies worldwide.
How do I clean the lens and housing?
Disconnect the fixture from power before cleaning. Use a soft, dry cloth to wipe the lens and housing. For stubborn dirt, slightly dampen the cloth with water or a mild glass cleaner. Never use abrasive materials or solvents, as they may damage the surface.
Can I replace the LEDs?
The LED modules are replaceable due to the modular design. However, replacement should be performed by a qualified technician. Contact an authorized service center to obtain genuine spare parts and ensure proper installation.
Does the fixture support sound active mode?
Yes, the Pixie Strip 30 has a sound active mode that reacts to music. Enable this mode via the control panel; the built-in microphone will trigger color changes and strobing effects in sync with the beat.
How many DMX channels does it use?
In DMX mode, the Pixie Strip 30 uses 7 DMX channels. These control functions such as red, green, blue, dimmer, strobe, and color macros.
What is the best way to mount the fixture?
Use the integrated yoke bracket and attach a safety clamp to a sturdy truss or lighting stand. Always secure the fixture with a safety cable to prevent accidents. Position it at least 20 feet from flammable materials.
Are there any recommended maintenance procedures?
Regularly check for loose connections, clean the lens and fan vents, and ensure the fixture is securely mounted. Periodically test the DMX control and inspect the power cord for damage. Service should be done by a qualified professional if internal components require attention.
User questions about Pixie Strip 30 American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Pixie Strip 30 - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pixie Strip 30 by American DJ.
USER MANUAL Pixie Strip 30 American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : Pixie Strip 30
Category : Lighting