PHBS6.7FLLIX - Range hood HOTPOINT - Free user manual and instructions
Find the device manual for free PHBS6.7FLLIX HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in range hood |
| Installation type | Wall-mounted / fixed built-in |
| Width | 598 mm |
| Depth | 270 mm |
| Height | 270 mm (adjustable duct cover) |
| Net weight | 12 kg |
| Surface finish | Stainless steel |
| Airflow (max) | 680 m³/h |
| Number of speeds | 3 plus intensive boost |
| Control type | Soft-touch push buttons |
| Motor type | Single motor, 180 W |
| Noise level | 48–62 dB |
| Lighting | 2 × 2.8 W LED spotlights |
| Grease filter | Washable aluminium mesh filter |
| Duct diameter | 150 mm |
| Recirculation mode | Optional carbon filter |
| Energy efficiency class | B (EEI 85.2) |
| Power supply | 220–240 V, 50 Hz |
| Safety features | Overheat protection, safety shutdown |
| Maintenance | Clean filters monthly; wipe surfaces with damp cloth |
| Repairability | Spare parts available for 10 years |
| Included accessories | Duct adapter, fixing kit, instruction manual |
Frequently Asked Questions - PHBS6.7FLLIX HOTPOINT
How do I clean the grease filters?
Remove the aluminium mesh filters and wash them in warm soapy water or in the dishwasher (max 65°C). Dry them completely before reinstalling to prevent rust or odours.
Can I use the hood in recirculation mode without a duct?
Yes. Install the optional carbon filter and ensure the air outlet is directed back into the kitchen. The carbon filter absorbs odours and should be replaced every 3–6 months.
How do I replace the LED light?
Switch off the hood. Gently pry out the light housing with a flat screwdriver, pull the LED module, and replace it with an identical 2.8 W LED spotlight. Press back into place.
What does the intensive boost function do?
The intensive boost mode temporarily increases the motor speed to the maximum airflow (680 m³/h) to quickly remove heavy steam or smoke. It automatically switches back to normal speed after 5 minutes.
Why is the hood noisy?
Noise can be caused by a clogged filter, improper duct installation, or a loose ventilation pipe. Clean the filters and check that the duct is rigid, airtight, and not excessively long.
How often should I replace the carbon filter?
When using recirculation mode, replace the carbon filter every 3 to 6 months, or more often if you cook heavily. A saturated carbon filter reduces odour absorption and airflow.
What is the minimum installation height above a gas hob?
For gas hobs, the minimum height is 65 cm. For electric hobs, it is 55 cm. Always follow the exact dimensions in the manual to ensure safe and efficient extraction.
Can I connect the hood to a shared extraction duct?
Avoid connecting the hood to a shared or common duct (e.g., chimney flue) unless it is specifically designed for kitchen extraction. It may lead to poor airflow and a fire hazard. Use a dedicated duct when possible.
How can I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed down button for 3 seconds until the indicator light goes off. This resets the alarm and restarts the counter.
What should I do if the controls don't respond?
First, check that the hood is powered and the connections are secure. If the control board is stuck, turn off the power for 2 minutes then restart. If it persists, the electronic board may need replacement - contact an authorised technician.
User questions about PHBS6.7FLLIX HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual PHBS6.7FLLIX - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PHBS6.7FLLIX by HOTPOINT.