PHVS 91F LT DP K - Range hood HOTPOINT - Free user manual and instructions
Find the device manual for free PHVS 91F LT DP K HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Hood |
| Brand | Hotpoint |
| Model | PHVS 91F LT DP K |
| Width | 90 cm (35.4 in) |
| Depth | 50 cm (19.7 in) |
| Height (min-max) | 60-120 cm (23.6-47.2 in) |
| Net Weight | Approx. 15 kg (33 lb) |
| Power Supply | 220-240 V, 50 Hz |
| Total Power Consumption | 250 W |
| Motor Power | 200 W |
| Lighting Power (LED) | 2 x 3 W |
| Max Extraction Capacity (m³/h) | 650 m³/h |
| Noise Level (max speed) | 65 dB(A) |
| Number of Speeds | 4 + Intensive |
| Filter Type | Aluminum grease filter |
| Carbon Filter Optional | Yes (recirculation mode) |
| Control Type | Electronic push buttons |
| Ducting Diameter | 150 mm (6 in) |
| Installation Type | Ducted or recirculating |
| Energy Efficiency Class | A+ |
Frequently Asked Questions - PHVS 91F LT DP K HOTPOINT
How do I install the Hotpoint PHVS 91F LT DP K hood?
Installation should be carried out by a qualified professional. Ensure the hood is mounted at least 65 cm above electric cooktops and 75 cm above gas cooktops. Follow the installation manual for ducting or recirculation setup.
How often should I clean the grease filters?
Clean the aluminum grease filters every 2-3 months, or more frequently with heavy use. Remove them and wash with warm soapy water or in a dishwasher. Ensure they are completely dry before reinserting.
Can I use the hood in recirculation mode?
Yes, the hood can be used in recirculation mode by installing a carbon filter (not included). This filters odors and recirculates air back into the room.
How do I replace the carbon filter?
The carbon filter is located behind the grease filters. Remove the grease filters, slide out the old carbon filter, and insert a new one. Replace every 6-12 months depending on usage.
Why is the hood making excessive noise?
Excessive noise may be due to loose parts, blocked ducting, or a dirty filter. Check that the installation is secure and clean the grease filters. If noise persists, contact a technician.
How do I change the LED lights?
LED lights are long-lasting and typically need replacement after several years. If they fail, contact customer service to obtain the correct replacement part. Do not attempt to replace them yourself if not specified in the manual.
What is the maximum ducting length?
For optimal performance, keep ducting as short and straight as possible. Maximum recommended length is 5 meters with minimal bends. Use smooth pipes of 150 mm diameter.
Can I install the hood over an island?
This model is designed for wall or under-cabinet installation. For island installation, you may need a ceiling mounting kit (sold separately). Check the manual for compatibility.
How do I reset the filter alarm?
After cleaning or replacing filters, press and hold the filter reset button (usually marked with a filter icon) for 3 seconds until the indicator turns off.
Where can I find spare parts?
Genuine spare parts (filters, bulbs, etc.) are available from authorized Hotpoint service centers or online parts retailers. Always quote the model number PHVS 91F LT DP K.
User questions about PHVS 91F LT DP K HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual PHVS 91F LT DP K - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PHVS 91F LT DP K by HOTPOINT.
USER MANUAL PHVS 91F LT DP K HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : PHVS 91F LT DP K
Category : Range hood