PHVP62FLMK - Range hood HOTPOINT - Free user manual and instructions
Find the device manual for free PHVP62FLMK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cooker Hood |
| Model | PHVP62FLMK |
| Brand | Hotpoint |
| Width | 60 cm |
| Installation Type | Built-in |
| Extraction Rate | 390 m³/h |
| Noise Level | 65 dB |
| Lighting | LED |
| Number of Speeds | 3 |
| Controls | Mechanical buttons |
| Energy Class | A |
| Grease Filter Type | Aluminum |
| Carbon Filter Included | No (optional accessory) |
| Weight | 10 kg |
| Power Consumption | 120 W |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Automatic Shut-Off | No |
| Duct Diameter | 150 mm |
| Maintenance | Clean grease filter monthly |
Frequently Asked Questions - PHVP62FLMK HOTPOINT
How do I install the Hotpoint PHVP62FLMK hood?
Installation should be carried out by a qualified professional. Ensure the hood is mounted at least 65 cm above the hob. Follow the user manual for detailed steps.
How often should I clean the grease filter?
The aluminum grease filter should be cleaned every month or more frequently for heavy use. Soak in warm soapy water or run through the dishwasher.
Can I use a carbon filter with this hood?
Yes, the PHVP62FLMK is compatible with a carbon filter (not included) for recirculation mode. Replace it every 3-6 months.
How do I change the LED bulb?
The hood uses integrated LED lighting that cannot be replaced separately. If the light fails, contact customer service.
What is the noise level of this hood?
The noise level is approximately 65 dB at maximum speed, which is comparable to a conversation.
How do I reset the filter alarm?
After cleaning or replacing filters, press and hold the speed button for 3 seconds to reset the alarm indicator.
Can I install this hood over a gas hob?
Yes, but maintain a minimum distance of 65 cm between the hood and the hob surface. Follow safety guidelines.
What is the extraction rate for recirculation mode?
The extraction rate decreases slightly when using a carbon filter. The maximum is 390 m³/h in ducted mode.
How do I set the timer function?
This model does not have a timer function. It must be turned off manually.
What are the dimensions for cutout installation?
The cutout dimensions are typically 560 x 280 mm. Refer to the installation template in the manual.
User questions about PHVP62FLMK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual PHVP62FLMK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PHVP62FLMK by HOTPOINT.
USER MANUAL PHVP62FLMK HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : PHVP62FLMK
Category : Range hood