Cutter 2 TRX - Shredder Tracer - Free user manual and instructions
Find the device manual for free Cutter 2 TRX Tracer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Paper Shredder |
| Brand | Tracer |
| Model | Cutter 2 TRX |
| Cut Type | Particle / Cross-cut |
| Shred Size | 4 x 38 mm |
| Shredding Capacity | 6 sheets (70-80 gsm) |
| Feed Width | 220 mm (A4) |
| Bin Capacity | 15 liters |
| Dimensions (W x D x H) | 350 x 250 x 550 mm |
| Weight | 4.2 kg |
| Power Input | 120 W |
| Voltage | 220-240 V ~ 50/60 Hz |
| Duty Cycle | 2 min on / 20 min off |
| Noise Level | Approx. 60 dB |
| Safety Level | P-3 |
| Anti-Jam Function | Auto-reverse |
| Overheat Protection | Yes |
| Recommended Maintenance | Oil blades every 2 months |
| Spare Parts Available | Replacement blades and gears |
| Intended Use | Home / small office |
Frequently Asked Questions - Cutter 2 TRX Tracer
How many sheets can the Tracer Cutter 2 TRX shred at once?
It can shred up to 6 sheets of standard 70-80 gsm paper in one pass. Do not exceed this capacity to avoid jams.
The shredder jams frequently. What should I do?
Switch to reverse mode for 2-3 seconds, then resume forward. If the jam persists, unplug the device and carefully remove paper from the blades with tweezers. Always reduce the sheet count.
Do I need to oil the shredder?
Yes, regular blade oiling keeps the cutter sharp and prevents paper dust buildup. Use a non-aerosol shredder oil every two months or after emptying the bin 3-4 times.
What happens if the motor overheats?
The shredder has thermal overload protection. The motor stops automatically and requires roughly 20 minutes to cool down before resuming operation. Ensure the duty cycle is respected.
How do I empty the waste bin safely?
Unplug the shredder, open the door or lift the cutter head, and pull out the bin. Dispose of the confetti. Avoid touching the blades.
Can this shredder handle staples, credit cards, or CDs?
It is designed for paper only. Do not feed anything other than paper, as staples, cards, or CDs can damage the cutting blade.
How can I clean the outside of the machine?
Use a soft, dry cloth to wipe the exterior. Do not use water, abrasive cleaners, or solvents. Clean the cutting mechanisms only through periodic oiling.
Is the shredder safe for households with children?
The device has a safety lock and is rated P-3 security level, but always keep it away from young children. Supervise use and keep fingers out of the feed slot.
What is the recommended operational cycle?
The Tracer Cutter 2 TRX has a duty cycle of 2 minutes ON / 20 minutes OFF. After two minutes of continuous shredding, allow it to cool down for the remaining 20 minutes.
Where can I find replacement parts?
Replacement blades and gears are available through Tracer authorized service centers. Refer to the manual for part numbers and service contacts.
User questions about Cutter 2 TRX Tracer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Shredder in PDF format for free! Find your manual Cutter 2 TRX - Tracer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Cutter 2 TRX by Tracer.
USER MANUAL Cutter 2 TRX Tracer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tracer
Model : Cutter 2 TRX
Category : Shredder