VT-44012 - Lighting V-TAC - Free user manual and instructions
Find the device manual for free VT-44012 V-TAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | V-TAC |
| Model | VT-44012 |
| Product Type | LED floodlight |
| Category | Lighting |
| Power Consumption | 50 W |
| Input Voltage | AC 220-240 V, 50 Hz |
| Luminous Flux | 4000 lumens |
| Color Temperature | 6500 K (cool daylight) |
| Beam Angle | 120 degrees |
| Housing Material | Die-cast aluminum |
| Lens Material | Tempered glass |
| Protection Rating | IP65 - dust-tight and protected against water jets |
| Dimensions (L x W x H) | 285 x 240 x 38 mm |
| Weight | 1.2 kg |
| Lifespan | 30,000 hours |
| Operating Temperature | -30°C to +50°C |
| Mounting | Adjustable steel bracket |
| Dimmable | No |
| Maintenance and Cleaning | Disconnect power and wipe with a soft dry cloth |
| Safety Features | Overheating and overvoltage protection |
| Spare Parts and Repairability | Replaceable LED driver and gasket available from service centers |
| Certifications | CE, RoHS |
| Warranty | 3 years |
Frequently Asked Questions - VT-44012 V-TAC
Is the V-TAC VT-44012 suitable for outdoor use?
Yes, the VT-44012 has an IP65 protection rating, which means it is dust-tight and protected against water jets. It can be mounted outdoors, for example on walls, facades or garden posts.
Can I replace the LED module if it stops working?
The LED source is not meant for user replacement, but the LED driver and the gasket can be replaced by a qualified technician. Contact an authorized V-TAC service center for repairs to maintain safety and performance.
Does this floodlight need an external transformer?
No, the VT-44012 is designed to operate directly from AC 220-240 V, 50 Hz. The built-in driver handles voltage conversion and stabilization, so no external transformer is required.
How do I connect the wires?
Open the terminal block on the rear of the fixture and connect the phase, neutral and earth wires to the corresponding terminals. Use a waterproof cable gland and make sure the connections are tight before closing the cover.
Can I use the VT-44012 with a motion sensor?
Yes, it can be connected to an external motion sensor or photocell, as long as the sensor has enough rated load and the wiring is done according to the manual. A qualified electrician should perform this installation.
Is this LED floodlight dimmable?
No, the VT-44012 is not dimmable. Using a standard wall dimmer may cause flickering or damage the driver. It should be used with a simple on/off switch.
How should I clean the fixture?
Disconnect the power first, then wipe the housing and glass with a soft, dry cloth. Do not use water sprays, abrasive cleaners or solvents, because they can damage the IP65 seal.
What is the lifespan of the VT-44012?
The LED light source has a rated lifespan of 30,000 hours, based on constant operation under normal conditions. The actual lifespan may vary with operating temperature and ventilation.
Does the product come with a warranty?
Yes, V-TAC provides a 3-year warranty against manufacturing defects. Keep the purchase receipt and contact your point of sale or the V-TAC service team for warranty claims.
How should I dispose of this product?
Do not throw the floodlight in household waste. Recycle it at an appropriate WEEE collection point because it contains electronic components and an LED module. Follow local regulations for electrical and electronic equipment disposal.
User questions about VT-44012 V-TAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual VT-44012 - V-TAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-44012 by V-TAC.