VT-411CCT - Lighting V-TAC - Free user manual and instructions
Find the device manual for free VT-411CCT V-TAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | V-TAC |
| Model | VT-411CCT |
| Product Type | LED Ceiling Light |
| Colour Temperature | 3000K / 4000K / 6500K (selectable) |
| Power Consumption | 18W |
| Luminous Flux | ~2000 lm at 4000K |
| Input Voltage | AC 220-240V, 50/60Hz |
| Material | Aluminium frame, PMMA diffuser |
| Dimensions | Ø400 x 80 mm |
| Weight | 1.2 kg |
| Mounting Type | Ceiling mounted |
| IP Rating | IP20 (indoor use) |
| Dimming | Not dimmable |
| Lifespan | 25,000 hours |
| Warranty | 2 years |
| Energy Class | A+ |
| Safety Class | Class II (double insulated) |
| Included Accessories | Mounting bracket, screws, plugs |
| CCT Switching | Yes, via selector switch |
| Spare Parts | Driver replaceable, LED panel integrated |
Frequently Asked Questions - VT-411CCT V-TAC
What is the color temperature range of the VT-411CCT?
The VT-411CCT offers three switchable color temperatures: warm white (3000K), neutral white (4000K), and cool white (6500K). Use the selector switch on the backplate or in the connector block before installation.
Can the VT-411CCT be used with a dimmer switch?
No, this LED ceiling light is not dimmable. Using a dimmer may cause flickering or damage the driver.
What is the power consumption and brightness?
It consumes 18W and delivers approximately 2000 lumens, depending on color temperature. This provides energy-efficient illumination comparable to a 100W incandescent bulb.
Is it suitable for bathrooms or outdoor use?
The light has an IP20 rating, making it suitable for dry indoor areas only. Do not install in bathrooms, kitchens, or outdoor locations where moisture or dust could enter the fixture.
How do I change the color temperature?
Before mounting, locate the CCT selector switch on the rear or inside the terminal box. Slide it to choose 3000K, 4000K, or 6500K. The setting is fixed once installed unless you re-access the wiring.
What is the installation process?
Turn off the mains supply. Drill holes for the mounting bracket, connect the live (L), neutral (N), and earth (if applicable) wires to the terminal block, then secure the fixture using the screws and anchors provided. Ensure the canopy seats flush.
How long is the lifespan and what is the warranty?
The LED module is rated for 25,000 hours of operation. V-TAC offers a 2-year warranty against manufacturing defects.
How should I clean the fixture?
Use a soft, dry cloth to wipe the diffuser. Do not use abrasive cleaners or water, as moisture can damage the electrical components.
Can the LED module be replaced if it fails?
The LED panel is integrated and not user-replaceable. However, the driver can be replaced by a qualified electrician. If the LEDs fail, the entire fixture should be replaced under warranty.
What safety certifications does it have?
It complies with CE standards and is double insulated (Class II), so a separate earth connection is not required for plastic-bodied fixtures. Always observe local wiring regulations.
User questions about VT-411CCT V-TAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual VT-411CCT - V-TAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-411CCT by V-TAC.
USER MANUAL VT-411CCT V-TAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : V-TAC
Model : VT-411CCT
Category : Lighting