HDCH-MD650GIX - Range hood Heinner - Free user manual and instructions
Find the device manual for free HDCH-MD650GIX Heinner in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Range hood |
| Brand | Heinner |
| Model | HDCH-MD650GIX |
| Product category | Chimney extractor hood |
| Installation type | Wall-mounted |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 65 cm to 110 cm adjustable chimney |
| Weight | 15 kg |
| Material and finish | Stainless steel with tempered glass |
| Controls | Electronic touch panel |
| Speeds | 3 speeds plus boost |
| Maximum extraction rate | 650 m3/h |
| Motor power | 200 W |
| Lighting | 2 x 3 W LED lights |
| Air outlet diameter | 150 mm |
| Grease filters | 2 washable aluminum filters |
| Charcoal filter | Optional, required for recirculation mode |
| Operation mode | Ducted outdoor or recirculation |
| Power supply | 220-240 V, 50 Hz |
| Noise level | Maximum 65 dB |
| Energy efficiency class | Class B |
| Spare parts availability | Available from Heinner service network |
| General information | Designed for daily ventilation in kitchens |
Frequently Asked Questions - HDCH-MD650GIX Heinner
What type of installation does the HDCH-MD650GIX require?
This is a wall-mounted chimney range hood. It needs to be fixed to a solid wall and the exhaust duct should be connected to an external outlet of 150 mm if used in extraction mode. Ensure a minimum distance of 65 cm from the cooking surface for electric hobs and 75 cm for gas.
Can I use the hood without an exhaust duct?
Yes, the hood can be used in recirculation mode. Install a charcoal filter (not supplied) in addition to the aluminum grease filters. The air is filtered and returned into the room.
How do I clean the grease filters?
Remove the aluminum grease filters and wash them by hand in warm water with mild detergent or in the dishwasher at low temperature. Rinse and dry thoroughly before reinstalling. Clean them at least once a month depending on use.
How often should the charcoal filter be replaced?
The charcoal filter should generally be replaced every 3 to 6 months when the hood is used in recirculation mode. Replace it sooner if you cook frequently with strong odors.
What type of lighting does it use?
The hood is equipped with 2 LED lights of 3 W each. LED bulbs provide bright and energy-saving light. A qualified technician should replace them.
Why is the hood noisy at high speed?
Noise increases with airflow speed. The maximum noise level is around 65 dB. Check that filters are clean and the duct is not blocked. To reduce noise, use a lower speed and install the duct with smooth curves.
What are the exact dimensions of the hood?
The main body is 60 cm wide and 50 cm deep. The chimney height extends from 65 cm to 110 cm, which allows alignment with most kitchen cabinets.
How do I select the correct speed?
Use the touch control panel to select speeds: low speed for simmering, medium for normal cooking, and high or boost for strong smoke and frying. Boost mode runs at maximum airflow for short periods.
Does the hood need an electrical socket nearby?
The hood plugs into a standard 220-240 V, 50 Hz socket. The electrical supply point should be close enough to reach the power cord, but positioned above the hood or behind the chimney for a clean installation.
Are spare parts available for the Heinner HDCH-MD650GIX?
Yes, Heinner provides spare parts such as aluminum grease filters, charcoal filters and LED modules through its service network. Contact Heinner's customer service to order compatible parts.
User questions about HDCH-MD650GIX Heinner
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual HDCH-MD650GIX - Heinner and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDCH-MD650GIX by Heinner.