JUBI 12AR - Loudspeaker PHONIC - Free user manual and instructions
Find the device manual for free JUBI 12AR PHONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-way passive PA loudspeaker |
| Brand | Phonic |
| Model | JUBI 12AR |
| Woofer | 12" high-efficiency driver |
| Tweeter | 1" compression driver on constant directivity horn |
| Frequency Response | 55 Hz - 20 kHz |
| Power Handling (RMS) | 250 W |
| Peak Power Handling | 500 W |
| Impedance | 8 ohms |
| Sensitivity (1W/1m) | 97 dB SPL |
| Coverage Angle | 90° horizontal x 40° vertical |
| Inputs | 2x Speakon NL4, 1x 1/4" phone jack (parallel) |
| Enclosure Material | Plywood with black carpet finish |
| Grille | Powder-coated steel grille with acoustically transparent foam |
| Mounting Options | 35 mm pole mount socket, 2x M10 flying points |
| Dimensions (H x W x D) | 580 x 350 x 310 mm |
| Weight | 17.0 kg |
| Operating Environment | Indoor / protected outdoor use |
| Care Instructions | Wipe with dry cloth, keep away from moisture and extreme temperatures |
| Safety Warnings | Ensure secure and stable mounting before use; check all rigging hardware |
| Spare Parts | Woofers, tweeters, crossovers available via Phonic authorized service centers |
Frequently Asked Questions - JUBI 12AR PHONIC
How do I connect the JUBI 12AR to an amplifier?
Use a high-quality speaker cable from the amplifier output to one of the Speakon NL4 connectors on the speaker. Ensure the amplifier is powered down when connecting. The parallel connector allows you to daisy-chain another cabinet.
What is the optimal placement for a single speaker?
Place the speaker on a sturdy stand at ear level for the audience. Point the horn directly at the listening area for best high-frequency coverage. Keep at least 1 meter away from walls and corners to reduce bass buildup.
Can I use this speaker with a subwoofer?
Yes. For full-range sound, connect the JUBI 12AR in parallel with a subwoofer using the crossover on an active crossover or powered sub. Set the high-pass to around 80-100 Hz to reduce strain and improve clarity.
How do I clean the grille and enclosure?
Use a soft, dry cloth to wipe the cabinet gently. For the grille, vacuum with a brush attachment or brush away dust. Do not use water, solvents, or abrasive cleaners, as they can damage the carpet finish and speaker components.
What gauge speaker wire should I use?
For runs up to 15 meters, use 12 AWG speaker cable. For longer runs, use 10 AWG to minimize power loss and ensure the amplifier delivers full power to the speaker. Keep the wire away from mains lines to avoid interference.
Can this speaker be used as a monitor wedge?
Yes. The JUBI 12AR can be placed on its side to function as a floor monitor. The trapezoidal shape allows it to angle upward toward the performer. Ensure it is placed flat and stable, and avoid covering the rear ports.
Does the speaker have a built-in crossover?
Yes. The internal passive crossover separates the audio signal into low frequencies for the woofer and high frequencies for the compression driver. This allows you to connect the speaker directly from a single amplifier channel.
What is the maximum power I should feed the speaker?
The speaker can handle up to 250 W RMS and 500 W peak. Feed it with an amplifier rated between 250 and 500 W per channel at 8 ohms. Always avoid clipping and use a limiter if possible to prevent damage.
How do I mount the speaker on a tripod stand?
Insert the stand pole into the 35 mm pole mount socket on the bottom of the speaker. Ensure the pole is securely tightened. For flying, use the M10 rigging points with proper bolts and safety cables, always following local safety regulations.
Who do I contact if a driver needs replacement?
Contact an authorized Phonic service center for genuine spare parts. The model number and serial number are usually printed on the rear label. Do not attempt to open the speaker yourself, as this may void the warranty.
User questions about JUBI 12AR PHONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual JUBI 12AR - PHONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JUBI 12AR by PHONIC.
USER MANUAL JUBI 12AR PHONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHONIC
Model : JUBI 12AR
Category : Loudspeaker