SCT M1060BWT - Radio SENCOR - Free user manual and instructions
Find the device manual for free SCT M1060BWT SENCOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Radio |
| Brand | Sencor |
| Model | SCT M1060BWT |
| Color | White |
| Radio Bands | FM, AM |
| Tuning Type | Digital PLL |
| Display | LCD with backlight |
| FM Frequency Range | 87.5 - 108 MHz |
| AM Frequency Range | 530 - 1600 kHz |
| Built-in Speaker | 1 x 3.5 inches |
| Output Power | 1 W RMS |
| Headphone Jack | 3.5 mm |
| AUX Input | 3.5 mm |
| Antenna | Telescopic (FM), ferrite bar (AM) |
| Power Supply | AC 230 V ~ 50 Hz, or 6 V via 4 x AA batteries |
| Battery Type | 4 x AA (not included) |
| Battery Life | Approximately 20 hours (at moderate volume) |
| Dimensions (W x H x D) | 220 x 130 x 60 mm |
| Weight | 0.5 kg |
| Clock and Alarm | Yes, dual alarm |
| Sleep Timer | Yes |
| Outdoor Use | Portable design with carrying handle |
| Cleaning | Wipe with a soft dry cloth |
| Safety | Do not expose to water or moisture; keep ventilation slots unobstructed |
Frequently Asked Questions - SCT M1060BWT SENCOR
How do I set the time on the Sencor SCT M1060BWT?
Press and hold the Time button until the hour flashes, then use the +/- or tuning buttons to set the hour. Press again to access minutes, set them, and confirm with the Time button.
How can I switch between FM and AM bands?
Press the Band button to toggle between FM and AM. The selected band will be shown on the LCD display.
What type of batteries does the radio use?
The radio uses 4 x AA batteries (not included) for portable operation. Insert them with correct polarity in the battery compartment at the bottom.
Can I use the radio without batteries?
Yes, you can use the included AC power adapter or connect to a standard 230V mains supply. The radio automatically switches to mains power when connected.
How do I improve FM reception?
Extend the telescopic antenna fully and adjust its angle for the best signal. For AM, rotate the radio itself to align the internal ferrite antenna with the broadcast station.
Is there an auxiliary input for external devices?
Yes, there is a 3.5mm AUX input on the side panel. Connect your music player or smartphone with a standard audio cable and press AUX to select this mode.
How do I set the alarm?
Press and hold the Alarm button until the time flashes. Set the desired alarm time using the tuning buttons, then select the alarm mode (Radio or Buzzer) by pressing the Snooze/Alarm Source button.
Can I use earphones with this radio?
Yes, plug earphones into the 3.5mm headphone jack. When headphones are connected, the built-in speaker is muted automatically.
How should I clean the radio?
Unplug the radio and wipe the exterior with a soft, dry cloth. Do not use liquid cleaners, abrasive agents, or expose the device to water or moisture.
What should I do if the radio doesn't turn on?
First check that the mains cord is properly connected or that the batteries are inserted with correct polarity. If it still does not work, contact qualified service personnel; do not attempt to open the device yourself.
User questions about SCT M1060BWT SENCOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual SCT M1060BWT - SENCOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCT M1060BWT by SENCOR.
USER MANUAL SCT M1060BWT SENCOR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SENCOR
Model : SCT M1060BWT
Category : Radio