KG1202 - Sander BLACK & DECKER - Free user manual and instructions
Find the device manual for free KG1202 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 1/4 sheet sander |
| Brand | Black & Decker |
| Model | KG1202 |
| Nominal power | 200 W |
| Supply voltage | 230 V ~ 50 Hz |
| No-load speed | 12,000 rpm |
| Base plate | 1/4 sheet (114 x 140 mm) |
| Weight | 1.5 kg |
| Dimensions (L x W x H) | 26 x 12 x 15 cm |
| Cable length | 2 m |
| Noise level | 82 dB(A) |
| Vibration level | 8.5 m/s² |
| Paper fastening system | Paper clamp |
| Dust collector | Integrated dust bag |
| Handle | Ergonomic handle |
| Main functions | Sanding, deburring, stripping surfaces |
| Recommended uses | Wood, metal, plastic, painted surfaces |
| Maintenance and cleaning | Clean with a dry cloth, empty the dust bag regularly |
| Safety | Switch off before changing the paper, wear a dust mask |
| Spare parts | Abrasive paper, dust bag, base plate |
| Repairability | Repairable by a technician, parts available from the manufacturer |
| General information | Free manual available on Notice-Facile.com |
Frequently Asked Questions - KG1202 BLACK & DECKER
How to change the abrasive paper on the KG1202 sander?
To change the paper, first unplug the sander. Open the paper clamps located on the base plate, remove the old paper, place the new one aligning the holes, then close the clamps making sure the paper is kept taut.
What type of abrasive paper should I use?
Use sanding sheets of 1/4 sheet size (114 x 140 mm). Choose the appropriate grit for the job: coarse (40 to 60) for heavy removal, medium (80 to 120) for sanding, fine (150 to 240) for finishing.
The sander no longer starts, what should I do?
First check that the appliance is plugged into a working outlet. Then inspect the condition of the power cord and the electrical socket to detect any faults. If the problem persists, take the appliance to an approved repair service.
How to avoid scratches on wood?
To avoid scratches, gradually use increasingly finer paper grit. Always sand in the direction of the wood grain and with moderate pressure. Avoid staying too long in one spot.
Can I use this sander without the dust bag?
Yes, you can use the sander without the bag, but the dust will be thrown into the air. It is therefore essential to wear a dust mask and protective goggles. The dust bag ensures better visibility and a cleaner environment.
What speed for which material?
The speed of 12,000 rpm is unique and fixed on this model. For soft materials like wood, use a coarser grit and light pressure. For metal, sand with short passes without forcing to avoid overheating the surface.
How to maintain the sander?
After each use, unplug the tool and clean it with a dry cloth. Empty the dust bag regularly to maintain suction. Do not use water or solvent for cleaning.
Is the sander suitable for curved surfaces?
This model is designed for flat surfaces. For curves or angles, a belt sander or a triangular sander would be more suitable. The rigid base plate cannot follow contours.
How to reduce vibrations?
Vibrations are normal on this type of sander. To reduce them, hold the tool with both hands, apply moderate pressure and let the machine do the work. Wear anti-vibration gloves if necessary.
Where to find spare parts?
Spare parts such as the abrasive paper, the dust bag or the base plate can be purchased at hardware stores or online. Use the model reference KG1202 to find compatible parts.
User questions about KG1202 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual KG1202 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KG1202 by BLACK & DECKER.