IS26T - Uncategorized DB Technologies - Free user manual and instructions
Find the device manual for free IS26T DB Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 2-way flush-mount speaker with 100 V transformer |
| Brand | DB Technologies |
| Model | IS26T |
| Dimensions (W x D x H) | 230 x 160 x 230 mm |
| Weight | 2.5 kg |
| Power supply | 100 V line or low impedance 16 ohms |
| Rated power | 20 W RMS |
| Power selector switch | Positions 5 W / 10 W / 20 W |
| Frequency response | 80 Hz - 20 kHz |
| Woofer | 165 mm (6.5 inches) |
| Tweeter | 25 mm (1 inch) dome |
| Dispersion angle | 90 degrees x 90 degrees |
| Sensitivity | 90 dB SPL at 1 m |
| Cabinet materials | ABS and steel grille |
| Mounting | Spring mounting clips |
| Finish | White |
| Application | Shops, restaurants, meeting rooms |
| Care and cleaning | Dust the grille with a dry soft cloth, avoid solvents |
| Safety | Do not expose to moisture or drops, check the wiring |
| Spare parts and repairability | Interchangeable speakers, repair by approved technician |
| General information | 2-year warranty, Italian manufacturing |
Frequently Asked Questions - IS26T DB Technologies
What is the power of the IS26T speaker?
The IS26T speaker has a rated power of 20 W on a 100 V line, with a transformer allowing you to select 5, 10 or 20 W.
How do I connect the speaker to a 100 V line?
Connect the cable from the 100 V amplifier to the speaker's input terminals. Respect the + and - polarity and select the desired power using the switch located on the back.
What are the power adjustment options?
The built-in transformer offers three positions: 5 W, 10 W and 20 W to adapt the sound level to the application.
What is the frequency response?
The frequency response is 80 Hz to 20 kHz, allowing faithful reproduction of voice and music.
Can the speaker be used in low impedance?
Yes, the IS26T model can operate at 16 ohms in low impedance mode, by disconnecting the transformer. See the user manual for details.
How do I install the speaker in the ceiling?
Cut a hole of the appropriate diameter, insert the speaker into the ceiling using the spring clips. Then connect the cable following the provided diagram.
What type of cable should I use?
For a 100 V line, use a speaker cable with a cross-section of 0.75 to 1.5 mm² depending on cable length and total power.
How do I clean the speaker?
Dust the grille with a dry soft cloth. For stains, use a slightly damp cloth, without solvent or abrasive cleaner.
Is the speaker suitable for outdoor use?
The IS26T model is designed for indoor use. Outdoor installation is not recommended without specific protection against moisture.
What should I do if the speaker produces no sound?
Check the wiring and the power selector. Make sure the amplifier is turned on and the channel is working. Replace the fuse if necessary, or contact a technician.
User questions about IS26T DB Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual IS26T - DB Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IS26T by DB Technologies.
USER MANUAL IS26T DB Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DB Technologies
Model : IS26T
Category : Uncategorized