HA640W - Cooker Freggia - Free user manual and instructions
Find the device manual for free HA640W Freggia in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Freestanding gas cooker |
| Brand | Freggia |
| Model | HA640W |
| Width | 60 cm |
| Depth | 60 cm |
| Height | 85 cm |
| Weight | 50 kg (approx) |
| Power supply | Gas (mains or cylinder) for the hob, electric for the oven |
| Oven | Fan-assisted, 65 liter capacity |
| Number of burners | 4, one of which is triple-ring |
| Total power | 8.5 kW |
| Ignition | Integrated electronic ignition |
| Safety | Thermocouple on all burners |
| Controls | Front knobs |
| Finish | Brushed stainless steel |
| Oven door | Double removable glass |
| Cleaning | Catalytic enamel for the oven |
| Grates | Chrome-plated steel grate for the hob |
| Included accessories | Drip tray and oven rack |
| Spare parts | Available on request |
| Certifications | CE |
| Warranty | 2 years |
Frequently Asked Questions - HA640W Freggia
How do I install the HA640W cooker?
The cooker must be installed by a qualified technician. Ensure that the gas and electrical connections comply with local regulations. Keep an adequate distance from walls and furniture, and use an approved flexible hose for the gas supply.
Does the HA640W cooker run on gas or electricity?
The HA640W model is a combined cooker: the hob is gas (mains or cylinder), while the oven is fan-assisted electric. This combines the speed of gas with the precision of an electric oven.
How do I turn on the oven?
Turn the oven knob to the desired temperature, then press and turn the thermostat knob until it ignites. The oven has electronic ignition and ventilation; you will hear a click and the pilot flame will light.
How do I clean the hob?
For the cast iron burners, use a soft brush and hot water. The stainless steel surface should be cleaned with a soft cloth and a specific steel cleaner, avoiding abrasives. The grates can be washed in the dishwasher.
How do I replace the oven light bulb?
Turn off the electrical power, unscrew the lamp cover, replace the bulb (E14, 25W, 300°C). Refit the lamp cover and turn on again. Only use bulbs suitable for high temperatures.
What is the thermocouple for?
The thermocouple is a safety device that shuts off the gas supply if the flame accidentally goes out. When lighting a burner, you need to keep the knob pressed for about 5 seconds to activate the sensor.
Can I use cast iron pots?
Yes, cast iron pots are suitable for the gas hob. Make sure they have a flat bottom and do not exceed the diameter of the burner for even heat distribution.
How do I adjust the flame of the burners?
The flame is adjusted using the knob on the front. In the minimum position, the flame must be stable. If you notice an irregular flame, a technician can adjust the intake air.
Why is the oven not heating up?
Check that the power cable is plugged in and that the thermostat is set. If the problem persists, there may be a fault with the heating element or thermostat. Contact technical support.
How do I request spare parts?
To request original spare parts, contact Freggia customer service through the official website, stating the model HA640W and the serial number. The retailer can also order the necessary parts.
User questions about HA640W Freggia
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooker in PDF format for free! Find your manual HA640W - Freggia and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HA640W by Freggia.