KBH 4641-4 - Hob Koenic - Free user manual and instructions
Find the device manual for free KBH 4641-4 Koenic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Ceramic Hob |
| Brand | Koenic |
| Model | KBH 4641-4 |
| Number of Cooking Zones | 4 |
| Heating Technology | Radiant heating elements under ceramic glass |
| Total Connected Load | 6.0 kW |
| Power Levels | 9 levels |
| Control Type | Touch control |
| Digital Timer | Yes, with automatic shut-off |
| Residual Heat Indicator | Yes, per cooking zone |
| Child Lock | Yes |
| Safety Shut-Off | Yes, after a set time |
| Overheat Protection | Yes |
| Surface Material | Ceramic glass |
| Product Dimensions (WxDxH) | 580 x 510 x 55 mm |
| Cut-Out Dimensions (WxD) | 560 x 490 mm |
| Product Weight | Approx. 5.5 kg |
| Rated Voltage | 220-240 V ~ 50/60 Hz |
| Cleaning | Use a damp cloth or ceramic hob cleaner |
| Spare Parts Availability | Yes, heating elements and control units available |
| Built-In Installation | Requires a 560 x 490 mm cut-out with adequate ventilation |
Frequently Asked Questions - KBH 4641-4 Koenic
How do I install the Koenic KBH 4641-4 hob?
Ensure the cut-out dimensions are 560 x 490 mm. Place the hob with the correct clearance from walls and furniture. The electrical connection must be done by a certified electrician, respecting the wiring diagram and safety regulations. Use the supplied sealing tape on the perimeter to prevent liquid ingress.
What cookware can I use on a ceramic hob?
Use flat-bottomed pans made of stainless steel, enameled cast iron, or aluminum with a smooth base. Check that the pan diameter is not larger than the cooking zone. Avoid pans with copper or aluminum bases as they can leave marks. Do not use glass or ceramic cookware unless marked as hob-safe.
How do I activate the child lock?
Press and hold the child lock key (usually the key with a padlock symbol) for about 3 seconds until the indicator lamp turns on. If any other touch control is used, the hob will ignore it. To deactivate, repeat the same action.
How do I use the digital timer?
While a cooking zone is active, press the timer key and then select the zone. Use the +/- keys to set the desired time (from 1 to 99 minutes). When the time expires, the hob automatically switches off that zone. You can set the timer for each zone individually.
What does the residual heat indicator mean?
When a cooking zone is switched off, the display shows a red "H". This indicates that the zone is still hot and you could get burned. Do not touch it until the "H" disappears. The heat is also useful for keeping food warm. If there is a power outage, the residual heat indicator may recharge and stay on; do not rely on it for safety.
What should I do if a cooking zone does not heat up?
Check that the hob is properly connected to the electrical supply and that the power control is not in standby mode. Verify that the corresponding zone is selected and not in timer-only mode. If the problem persists, try resetting the hob by turning off the mains breaker for a few minutes. If the issue remains, contact a qualified technician.
How do I clean the ceramic hob?
Wait for the hob to cool completely. Use a ceramic hob scraper for burnt-on residues, then wipe with a damp cloth or a dedicated ceramic glass cleaner. Avoid abrasive sponges or harsh chemicals. Clean spills immediately to prevent permanent stains.
What electrical connection is required?
The hob operates on 220-240 V ~ 50/60 Hz and requires a suitable circuit with a rated current of at least 32 A. It should be connected via a properly rated mains cable and an all-pole disconnection switch. The installation must comply with local electrical codes.
Does the hob have any emergency shut-off?
Yes, it has a safety shut-off function. If you forget to switch off a cooking zone and it runs at the same power level for an unusually long time, the hob turns off automatically. The exact time depends on the selected power level. Also, the hob may shut down if it overheats.
Can I replace the heating elements myself?
Replacing a heating element is not recommended for DIY. The ceramic glass plate must be removed carefully, and all electrical connections must be made safely. We advise you to contact an authorized service centre or a qualified electrician. Spare parts are available through the manufacturer.
User questions about KBH 4641-4 Koenic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hob in PDF format for free! Find your manual KBH 4641-4 - Koenic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KBH 4641-4 by Koenic.
USER MANUAL KBH 4641-4 Koenic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Koenic
Model : KBH 4641-4
Category : Hob