IE 3008 - Uncategorized RCF - Free user manual and instructions
Find the device manual for free IE 3008 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Passive 2-way installation loudspeaker |
| Woofer | 8'' (210 mm) high-output woofer |
| Compression driver | 1'' (25 mm) compression driver with 1'' throat |
| Frequency response | 60 Hz – 20 kHz (±3 dB) |
| Power handling | 100 W RMS / 200 W peak |
| Impedance | 8 ohms (nominal) |
| Sensitivity | 90 dB SPL @ 1W/1m |
| Maximum SPL | 112 dB peak |
| Coverage angle | 90° x 60° (rotatable) |
| Enclosure material | Injection-molded ABS with UV-resistant paint |
| Dimensions (W x H x D) | 250 x 420 x 230 mm (9.8'' x 16.5'' x 9.1'') |
| Weight | 8.5 kg (18.7 lbs) |
| Connections | Neutrik speakON NL4 and screw terminal block |
| Mounting | Vertical or horizontal via integrated U-bracket |
| Ingress protection | IP54 (splash-proof and dust-resistant) |
| Power requirement | Passive speaker; requires an external amplifier |
| Maintenance | Clean with a soft dry cloth; do not use abrasive materials |
| Safety features | Safety lock pins, flying point, reinforced grille |
| Spare parts | Available from RCF authorized service centers |
| General information | Ideal for near-field reinforcement, delay lines, and fill systems |
Frequently Asked Questions - IE 3008 RCF
What are the main applications for the RCF IE 3008 loudspeaker?
The IE 3008 is a passive installation loudspeaker designed for near-field sound reinforcement in venues such as houses of worship, conference rooms, retail spaces, and auditoriums. It works well as a delay line, under-balcony fill, or as a primary speaker in small to medium installations.
What amplifier power is recommended for the IE 3008?
A minimum of 100 W RMS per channel is required. We recommend using a 200 W RMS amplifier to allow adequate headroom while respecting the speaker's peak power limit. Always operate with an amplifier that delivers between 80 W and 200 W RMS per channel at 8 ohms.
How do I connect the IE 3008 to an amplifier?
The speaker is equipped with a Neutrik speakON NL4 connector and a screw terminal block. For accurate polarity, connect the positive terminal to the amplifier's positive output and the negative terminal to the negative output. When using speakON, pin +1 and -1 are standard.
What is the optimal placement for the IE 3008?
Place the speaker at ear level or above, angling it toward the listening area. It can be mounted horizontally or vertically using the integrated U-bracket. Avoid placing the rear of the speaker too close to walls or corners to prevent excessive bass buildup.
Can the IE 3008 be used outdoors?
Yes, the enclosure is rated IP54, making it resistant to dust and splash water. However, it is not fully waterproof; protect it from prolonged rain or direct water jets. If installed outdoors, use weatherproof connectors and ensure all cable entry points are sealed.
How should I clean and maintain the IE 3008?
Clean the grille and enclosure with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the UV-resistant paint. Periodically check the mounting bolts and speaker connectors to ensure they are tight and free of corrosion.
What is the frequency response and how does it affect performance?
The speaker delivers a frequency range of 60 Hz to 20 kHz (±3 dB). This makes it suitable for speech intelligibility and most music genres. The 8'' woofer provides clear mids, while the compression driver handles high frequencies, resulting in consistent coverage across a 90° x 60° area.
Does the IE 3008 come with mounting brackets?
Yes, the loudspeaker ships with an integrated U-bracket for wall or ceiling mounting. The bracket ensures safe and adjustable positioning in horizontal or vertical orientations. Additional mounting accessories, such as safety wire clips, can be purchased separately.
Are spare parts available for the IE 3008?
All replacement components, including the woofer, compression driver, and crossover board, are available through RCF authorized service centers. Repairs should only be performed by qualified technicians to maintain product performance and safety.
What safety precautions should I take when installing the IE 3008?
Ensure the mounting surface can support the 8.5 kg (18.7 lb) weight. Always use the provided safety lock pins or a separate safety cable as a secondary retention. Never exceed the maximum input power, and avoid installing the speaker near heat sources or in areas with high humidity without proper protection.
User questions about IE 3008 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual IE 3008 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IE 3008 by RCF.
USER MANUAL IE 3008 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : IE 3008
Category : Uncategorized