DU 60EN - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free DU 60EN RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive 2-way loudspeaker |
| Brand | RCF |
| Model | DU 60EN |
| Woofer Driver | 6.5" high-efficiency woofer |
| Tweeter Driver | 1" dome tweeter |
| Frequency Response | 80 Hz - 20 kHz |
| Power Handling (RMS) | 60 W |
| Power Handling (Peak) | 120 W |
| Sensitivity | 90 dB SPL @ 1W/1m |
| Nominal Impedance | 8 ohms |
| 100V Line Taps | 60/30/15 W |
| Dispersion Angle | 90° horizontal, 60° vertical |
| Recommended Amplifier Power | 60 - 120 W at 8 ohms |
| Connectors | Euroblock screw terminals |
| Enclosure Material | High-impact polypropylene |
| Grille | Powder-coated steel |
| Mounting Options | Wall bracket (optional), safety tie-point |
| Dimensions (W x H x D) | 210 x 305 x 190 mm |
| Weight | 4.5 kg |
| Maintenance | Inspect connections and grille regularly |
| Cleaning | Wipe with a dry cloth; avoid solvents |
| Safety | CE compliant; secure installation required |
| Spare Parts | Drivers and crossover available via RCF |
| Repairability | Modular drivers; removable connection panel |
Frequently Asked Questions - DU 60EN RCF
What is the power handling of the RCF DU 60EN?
The DU 60EN handles 60 W RMS and 120 W peak. Use an amplifier delivering between 60W and 120W per channel at 8 ohms for optimal performance.
Can I connect the DU 60EN to a 100V line system?
Yes, the speaker includes a 100V line transformer with power taps for 60W, 30W and 15W. Select the appropriate tap to match your system's power requirement.
What is the nominal impedance of the speaker?
The nominal impedance is 8 ohms, so it can be driven by standard amplifiers designed for 8-ohm loads.
Is the DU 60EN suitable for outdoor use?
The enclosure is durable but not weatherproof. For outdoor installations, place it under cover or use an IP-rated enclosure protector.
How do I mount the speaker?
Use the integrated keyhole slots or the optional wall-mount bracket. Always secure the speaker with a safety cable to prevent accidental falls.
What is the frequency response of this speaker?
The specified frequency response is 80 Hz to 20 kHz. Bass reinforcement can be achieved by placing the speaker near a wall or corner.
How can I replace a driver or tweeter?
Remove the front grille and unscrew the defective driver. Most are connected by spade terminals. Spare parts can be ordered from RCF service centers.
What speaker cable should I use?
For low-impedance use, a 1.5 mm² or 16 AWG speaker cable is recommended. For 100V line installations, use a cable with appropriate voltage rating.
Can this speaker be used as a floor monitor?
Yes, its compact size and broad 90° x 60° dispersion make it suitable as a stage monitor or fill speaker.
How do I clean the speaker?
Use a soft dry cloth for the enclosure and grille. Avoid water, chemical solvents, and compressed air that could damage the driver.
User questions about DU 60EN RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual DU 60EN - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DU 60EN by RCF.
USER MANUAL DU 60EN RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : DU 60EN
Category : Loudspeaker