EKN60SS - Range hood CDA - Free user manual and instructions
Find the device manual for free EKN60SS CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted range hood |
| Brand | CDA |
| Model | EKN60SS |
| Material / finish | Stainless steel |
| Width | 600 mm |
| Depth | 500 mm |
| Height / chimney range | 640-1080 mm with adjustable chimney |
| Mounting type | Wall-mounted, ducted or recirculating |
| Number of speeds | 3 |
| Maximum extraction rate | 620 m³/h |
| Noise level | 46-64 dB(A) |
| Lighting | 2 x 3 W LED lamps |
| Grease filter | Washable aluminium mesh filter |
| Recirculation filter | Optional charcoal filter |
| Controls | Electronic push buttons |
| Duct outlet diameter | 150 mm |
| Power supply | 220-240 V, 50 Hz |
| Rated power | 158 W |
| Safety | Thermal motor protection, Class I appliance |
| Spare parts and repairability | Replaceable filters, LED modules, fan motor and control board available from CDA service centres |
| Warranty | 2-year manufacturer warranty |
Frequently Asked Questions - EKN60SS CDA
How do I install the CDA EKN60SS range hood?
Fix the mounting bracket securely to a solid wall, then hang the hood on it. Connect the 150 mm duct for extraction or fit the optional charcoal filter for recirculation mode.
Can the EKN60SS be used without a chimney duct?
Yes, it can be operated in recirculation mode. Install a certified charcoal filter over the motor outlet and direct the cleaned air back into the room.
How should I clean the grease filters?
Remove the aluminium mesh filters and wash them in warm soapy water or on a gentle dishwasher cycle. Dry them completely before putting them back. Do not use abrasive cleaners.
How do I replace the LED lights?
Switch off and unplug the hood. Gently release the LED module cover, disconnect the fitting, and replace it with a CDA approved 3 W LED module. Reconnect and test after refitting.
Why is the hood noisy on high speed?
Higher airflow naturally increases noise level. Check that the ducting is not crushed, filters are clean, and that no loose items are vibrating against the canopy or chimney.
What charcoal filter do I need for recirculation?
Use a CDA approved charcoal filter designed for 60 cm hoods. Replace it every 3-4 months, or more often with heavy frying, to keep odour removal effective.
What clearance height is recommended above the hob?
Install the hood so the lowest edge is at least 650 mm above an electric hob and 750 mm above a gas hob, or follow local safety codes.
Can I duct the hood horizontally?
Yes, but keep the duct as short and straight as possible. Use smooth pipe with a diameter of 150 mm and avoid sharp bends to maintain strong extraction.
What do the three speed settings do?
Speed 1 is for gentle simmering, speed 2 for everyday cooking, and speed 3 for frying or strong odours. Use the highest speed briefly after cooking to clear residual fumes.
Where can I get spare parts for the EKN60SS?
Contact CDA service or an approved dealer. Replacement grease filters, LED modules, fan motor and control board are available; quote the model number EKN60SS and the serial number when ordering.
User questions about EKN60SS CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual EKN60SS - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKN60SS by CDA.
USER MANUAL EKN60SS CDA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CDA
Model : EKN60SS
Category : Range hood