Trim - Uncategorized 2hp - Free user manual and instructions
Find the device manual for free Trim 2hp in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Synthesis Module |
| Brand | 2hp |
| Model | Trim |
| Category | Modular Synthesizer Utility |
| Format | Eurorack |
| Width | 2 HP (10.16 mm) |
| Depth | 27 mm |
| Weight | 28 g |
| Power Consumption | Passive (no power required) |
| Number of Channels | 2 |
| Function | Attenuator (signal level trimming) |
| Input Impedance | 100kΩ (typical) |
| Output Impedance | 1kΩ (typical) |
| Controls | 2 attenuator knobs |
| Connectors | 3.5mm mono jacks (2 in, 2 out) |
| Panel Material | Aluminum (silver or black) |
| Construction | High-quality PCB |
| Recommended Use | Trimming control voltage (CV) and audio signals |
| Compatibility | All Eurorack systems |
| Included Items | Module, mounting screws |
| Care and Cleaning | Wipe with a dry, soft cloth |
Frequently Asked Questions - Trim 2hp
What is the 2hp Trim module?
The 2hp Trim is a compact Eurorack module designed to provide dual-channel attenuation for control voltage and audio signals. It allows you to trim the level of a signal accurately.
How does the Trim module work?
The Trim uses simple passive attenuator circuits on each channel. Turning the knob changes the signal amplitude from zero to unity gain, without the need for power.
Does the Trim require a power connection?
No, the Trim is a passive module and operates without a connection to the Eurorack power bus. This makes it extremely easy to install and use in any case.
How do I install the Trim in my Eurorack case?
Install the Trim by securing it to the rails using M3 screws (included). Since it requires no power cable, simply align the module in a 2HP slot and tighten the screws. Make sure no metal parts touch the case to avoid shorts.
Can the Trim handle audio signals?
Yes, the Trim can be used with both audio and control voltage signals. It is ideal for scaling down hot signals to a usable level.
What is the maximum input level?
As a passive device, the Trim can handle typical synthesizer signals up to ±10V without issues. However, extremely high voltages could cause distortion or damage, so keep levels within standard modular range.
How many channels does the Trim have?
The Trim has 2 independent channels, each with an input jack, a knob, and an output jack. This allows you to process two signals simultaneously.
Does the Trim invert the signal?
No, the Trim is a unity gain attenuator that only reduces amplitude. It does not invert the signal polarity.
What are the input and output impedances?
The Trim provides a high input impedance (100kΩ typical) and a low output impedance (1kΩ typical), which prevents loading down signal sources and ensures clean transmission.
How should I clean and maintain the module?
Use a dry, soft cloth to wipe the panel and knobs. Avoid using liquids, solvents, or abrasive materials. Do not expose the module to moisture or extreme heat.
User questions about Trim 2hp
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Trim - 2hp and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Trim by 2hp.
USER MANUAL Trim 2hp
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : 2hp
Model : Trim
Category : Uncategorized