Blur - Uncategorized 2hp - Free user manual and instructions
Find the device manual for free Blur 2hp in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Module |
| Brand | 2hp |
| Model | Blur |
| Function | Reverb Effect |
| Width | 2 HP (10.16mm) |
| Depth | 40mm (approx) |
| Weight | 30g (approx) |
| Power Supply | +12V: 50mA, -12V: 50mA |
| Controls | Mix, Decay, Damp |
| Audio Input | 1x 3.5mm mono jack (Eurorack level) |
| Audio Output | 1x 3.5mm mono jack (Eurorack level) |
| Construction | PCB with panel, RoHS compliant |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Use in Eurorack case with proper power distribution; do not exceed rated current |
| Repairability | No user-serviceable parts; contact manufacturer for service |
| General Information | Designed for modular synthesizer systems; compact size for space-constrained setups |
Frequently Asked Questions - Blur 2hp
How do I install the 2hp Blur module in my Eurorack case?
Connect the 10-pin power ribbon cable to the module and your bus board, ensuring correct polarity (red stripe aligns with -12V). Mount using included screws, leaving 2HP space.
What are the power requirements for the Blur module?
The module requires +12V (50mA) and -12V (50mA). Ensure your power supply can provide adequate current.
What do the controls on the Blur do?
Mix blends dry and wet signal. Decay controls reverb tail length. Damp adjusts high-frequency damping for darker or brighter reverb.
Can I control the Blur with CV?
No, the Blur does not have CV inputs. All parameters are adjusted manually via potentiometers.
What is the input and output level?
Audio input and output are Eurorack level (10Vpp max). Use standard 3.5mm mono cables.
How do I clean the module?
Disconnect power. Wipe the panel with a soft, dry cloth. Do not use solvents or spray liquids.
What should I do if I get no sound from the Blur?
Check power connection (polarity). Ensure audio source is plugged into input and output is connected to mixer/speaker. Try adjusting Mix to full wet.
Is the Blur compatible with all Eurorack cases?
Yes, it fits any Eurorack case with sufficient depth (40mm). Ensure proper ventilation.
Does the Blur have a warranty?
2hp offers a limited warranty against manufacturing defects. Check with your retailer for details.
Can I use the Blur as a standalone effect?
The module requires an external audio source and Eurorack power. It is not battery-powered or standalone.
User questions about Blur 2hp
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Blur - 2hp and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Blur by 2hp.
USER MANUAL Blur 2hp
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : 2hp
Model : Blur
Category : Uncategorized