PKL 642 D2/IX/HAR - Hob HOTPOINT - Free user manual and instructions
Find the device manual for free PKL 642 D2/IX/HAR HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in gas hob |
| Brand | Hotpoint |
| Model | PKL 642 D2/IX/HAR |
| Installation type | Built-in, freestanding compatible |
| Number of burners | 4 gas burners |
| Burner configuration | 1 rapid, 2 semi-rapid, 1 auxiliary |
| Surface material | Stainless steel (AISI 304) |
| Pan support | Cast iron, removable |
| Ignition | Automatic electric ignition |
| Safety feature | Flame failure safety device (thermocouple) |
| Control type | Rotary knobs |
| Number of controls | 4 |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Gas connection | G 1/2" rear connection |
| Product dimensions (W x D) | 59 cm x 51 cm |
| Built-in cutout dimensions (W x D) | 56 cm x 48 cm |
| Net weight | 8.5 kg |
| Cleaning and maintenance | Easy-clean stainless steel surface with removable pan supports |
| Spare parts availability | 10 years after discontinuation |
| Compliance | CE marked, complies with EU gas appliance regulations |
Frequently Asked Questions - PKL 642 D2/IX/HAR HOTPOINT
What is the type of the Hotpoint PKL 642 D2/IX/HAR?
The Hotpoint PKL 642 D2/IX/HAR is a built-in gas hob with four burners, designed for installation into a kitchen worktop.
Can the hob be converted to use LPG (propane/butane)?
Yes, the hob is shipped for natural gas but can be converted to LPG by replacing the injectors. Refer to the manual for the correct nozzle sizes and adjustment of the minimum flame.
What are the dimensions and cutout requirements?
The product dimensions are 59 cm x 51 cm (width x depth). The required cutout in the worktop is 56 cm x 48 cm, with an appropriate clearance from edges and heat-resistant surfaces.
How does the flame failure safety device work?
Each burner is equipped with a thermocouple. If the flame goes out accidentally, the thermocouple cools down and cuts off the gas supply within a few seconds, preventing gas leaks.
The electric ignition is not working, what could be the issue?
Check that the hob is connected to the 220-240 V supply and that the plug fuse is intact. Clean the spark plug and burner caps to ensure a good spark. If the problem persists, the ignition module may need replacement.
Can I use woks and heavy cookware on this hob?
Yes, the cast iron pan supports are sturdy and can hold heavy pots and woks. The burner design provides stable support and efficient heat distribution.
How do I clean the stainless steel surface?
Wait for the hob to cool completely. Use a soft cloth with warm soapy water or a dedicated stainless steel cleaner. Avoid abrasive scrubbing pads to prevent scratches. Wipe in the direction of the brushed grain.
Is the hob easy to install by myself?
Installation requires gas and electrical connections. It is recommended to have a certified technician perform the installation to ensure compliance with local safety standards and warranty conditions.
What are the gas consumption ratings for each burner?
Typical ratings for this model are: auxiliary 1.0 kW, semi-rapid 1.75 kW, and rapid 3.0 kW (natural gas). Actual values may vary per gas type; consult the manual for precise injector sizes.
Are spare parts available for this model?
Hotpoint guarantees the availability of original spare parts for at least 10 years after the model is discontinued, including burner caps, injectors, knobs, and thermocouples.
User questions about PKL 642 D2/IX/HAR HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hob in PDF format for free! Find your manual PKL 642 D2/IX/HAR - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PKL 642 D2/IX/HAR by HOTPOINT.