AKB9004ARVS - Range hood INVENTUM - Free user manual and instructions
Find the device manual for free AKB9004ARVS INVENTUM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Inventum |
| Model | AKB9004ARVS |
| Width | 90 cm |
| Mounting Type | Wall-mounted chimney |
| Finish | Stainless steel |
| Number of Speeds | 3 |
| Max Extraction Capacity | 760 m³/h |
| Extraction Type | Ducted and recirculating |
| Air Duct Diameter | 150 mm |
| Grease Filters | 2 aluminum mesh filters |
| Lighting | 2 x 3 W LED lights |
| Controls | Push-button |
| Max Noise Level | 68 dB(A) |
| Annual Energy Consumption | 92 kWh/year |
| Energy Efficiency Class | A |
| Motor Power | 280 W |
| Voltage | 220-240 V ~ 50 Hz |
| Weight | 16 kg |
| Dimensions (W x D x H) | 900 x 500 x 700-1000 mm |
| Minimum Height Above Hob | 650 mm |
| Replacement Filter Part | Inventum grease filter 900 mm |
Frequently Asked Questions - AKB9004ARVS INVENTUM
How often should I clean the grease filters?
For optimal performance, clean the aluminum grease filters every 2-3 weeks, depending on usage. They are dishwasher safe and can be washed at a low temperature.
Can this range hood be used in recirculation mode?
Yes, the AKB9004ARVS supports both ducting and recirculation. In recirculation mode, you need to install two charcoal filters (not supplied) to neutralize odors.
What is the recommended installation height above a gas hob?
For gas hobs, a minimum distance of 65-75 cm is recommended. For electric hobs, 55-65 cm is sufficient. Always comply with local safety regulations.
How do I replace the LED lights?
The hood uses integrated LED modules. To replace them, switch off the power, remove the filters, and access the light unit. If the LEDs fail, contact Inventum service for a replacement module.
How can I change the chimney height?
The chimney is telescopic. Loosen the brackets at the top, slide the upper chimney section to the desired height, and tighten again. Ensure the ducting has enough space.
Why is my hood making excessive noise?
Excessive noise may be caused by loose ductwork, a blocked filter, or improper installation. Check and tighten all connections, and clean the filters to restore quiet operation.
How do I activate the boost function?
The hood has 3 speeds. Press the boost button (the highest speed setting) to temporarily increase extraction to maximum capacity for 5 minutes, then it returns to the previous speed.
Does this hood come with a charcoal filter for recirculation?
No, the charcoal filters are not included. They must be purchased separately. Order the Inventum CF600 charcoal filter set compatible with this model (or similar), and replace them every 3-6 months.
Can I install the hood with a longer duct?
You can extend the duct, but keep it as short and straight as possible. Each bend or extra meter reduces extraction efficiency. For best performance, use a smooth, rigid duct with a 150 mm diameter.
How do I clean the stainless steel surfaces?
Wipe with a soft cloth using warm water and mild detergent. Avoid abrasive products that could scratch the surface. For fingerprints, use a dedicated stainless steel cleaner.
User questions about AKB9004ARVS INVENTUM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual AKB9004ARVS - INVENTUM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AKB9004ARVS by INVENTUM.