SN1116COD - Server ATEN - Free user manual and instructions
Find the device manual for free SN1116COD ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 16-port Serial Device Server |
| Number of Serial Ports | 16 |
| Serial Interface | RS-232/422/485 software selectable |
| Ethernet Ports | 1 x RJ-45 10/100/1000 Mbps |
| Rack Mount | 1U rack-mountable with included brackets |
| Dimensions (W x D x H) | 43.2 x 26.0 x 4.4 cm (17 x 10.2 x 1.7 in) |
| Weight | Approximately 2.8 kg (6.2 lbs) |
| Power Supply | 100-240V AC, 50/60Hz internal |
| Baud Rate | Up to 460kbps |
| Protocols | TCP, UDP, HTTP, HTTPS, SSH, Telnet, SNMP |
| Configuration | Web browser, Telnet, or dedicated management utility |
| Operating Temperature | 0°C to 55°C (32°F to 131°F) |
| Humidity | 10% to 90% RH |
| Maintenance and Cleaning | Keep ventilation slots clear; wipe exterior with a soft dry cloth |
| Safety | Integrated surge protection; CE and FCC compliant |
| Repairability and Parts | Field-replaceable power supply unit; standard 1U rack screws |
| General Information | Supports Windows, Linux, and Unix platforms |
Frequently Asked Questions - SN1116COD ATEN
How do I connect the SN1116COD to my network?
Connect an Ethernet cable from the LAN port on the device to your switch or router. Then use the included management utility to detect the device on the network and assign a static IP address.
What is the default IP address of the device?
The default IP address is 192.168.1.100 with a subnet mask of 255.255.255.0. You can change it via the web interface or management utility.
How can I configure the serial ports?
Access the web-based configuration page, go to the Serial Settings section, and set the baud rate, data bits, stop bits, parity, and flow control for each port. All ports are software selectable for RS-232, RS-422, or RS-485.
Does the device support virtual COM port operation?
Yes, the SN1116COD supports Windows virtual COM ports with the provided driver. This allows existing serial software to work seamlessly over a network.
What are the supported baud rates?
The device supports standard baud rates from 50 bps to 460kbps, including common rates like 9600, 19200, 38400, 115200, etc.
How do I reset the device to factory defaults?
Press and hold the Reset button on the rear panel for at least 3 seconds while the device is powered on. The device will restart with factory default settings.
Can I access the device securely?
Yes, the SN1116COD supports SSH, HTTPS, and SSL encryption for secure remote access and management.
How do I update the firmware?
Download the latest firmware from ATEN's website, then upload it via the web management interface under the Firmware Upgrade section. Ensure the device is not disconnected during the process.
Does it work with Linux or Unix?
Yes, the device is platform-independent. It supports Linux and Unix via standard Telnet or SSH sessions. Virtual COM port drivers are available for Windows, while Linux/Unix use TTY redirection.
How can I troubleshoot connection issues?
Check that the LAN link LED is lit, verify the IP address and subnet mask, and test the port with a loopback adapter. Also confirm the serial port settings match the connected device's requirements.
User questions about SN1116COD ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SN1116COD - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SN1116COD by ATEN.
USER MANUAL SN1116COD ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : SN1116COD
Category : Server