VC-Dot 4 - Uncategorized MARTIN - Free user manual and instructions
Find the device manual for free VC-Dot 4 MARTIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Dot Projector for decorative lighting |
| Brand | Martin |
| Model | VC-Dot 4 |
| Dimensions (W x H x D) | 145 x 145 x 170 mm |
| Weight | 1.1 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 25 W maximum |
| Light Source | 4 x 1 W RGBW LEDs |
| Color Mixing | RGBW additive mixing |
| Control | DMX512, Standalone, Master/Slave |
| DMX Channels | 4 or 8 channels (selectable) |
| Housing | Die-cast aluminum, black finish |
| Lens | High-transmission clear lens |
| IP Rating | IP20 (indoor use only) |
| Operating Temperature | -10°C to 45°C |
| Safety Features | Overheating protection, fused power input |
| Maintenance | Clean exterior with damp cloth; keep ventilation slots dust-free |
| Repair | Fuse replaceable on rear panel; LED engine is not user-serviceable |
| Included Accessories | Power cord, mounting bracket, user manual |
| Manual Information | 28 pages, English language |
Frequently Asked Questions - VC-Dot 4 MARTIN
How do I connect the VC-Dot 4 to a DMX controller?
Use a standard DMX cable to connect the DMX input of the fixture to the controller output. Set the DMX address using the control panel.
What are the different operating modes?
The VC-Dot 4 supports DMX mode, Standalone mode, and Master/Slave mode. In Standalone, you can select preset color macros.
How do I clean the fixture safely?
Disconnect power first. Use a soft damp cloth to wipe the housing and lens. Do not use abrasive cleaners or solvents.
What should I do if the fixture does not power on?
Check the power cord, fuse (located near the power input), and ensure the mains voltage matches. Replace the fuse if necessary with same type and rating.
Can I mount the VC-Dot 4 outdoors?
No, this fixture is rated IP20 and intended for indoor use only. Exposure to water or moisture may damage electronics.
How far can the fixture be placed from the DMX controller?
Standard DMX runs can be up to 300 meters with a quality cable. Excessive distance may require a DMX splitter.
How do I set the DMX address?
Use the up/down buttons on the rear control panel to select desired address between 1 and 512. Press Enter to confirm.
What is the power consumption of the VC-Dot 4?
The maximum power consumption is 25 W at full output. It operates on 100-240 V AC.
Does the fixture support RDM (Remote Device Management)?
Yes, the VC-Dot 4 supports RDM for remote addressing and monitoring over DMX lines.
What is included in the package?
The package includes the VC-Dot 4 fixture, a mounting bracket, a power cord, and a user manual with 28 pages.
User questions about VC-Dot 4 MARTIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VC-Dot 4 - MARTIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VC-Dot 4 by MARTIN.
USER MANUAL VC-Dot 4 MARTIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MARTIN
Model : VC-Dot 4
Category : Uncategorized