VC-Grid 60 - Uncategorized MARTIN - Free user manual and instructions
Find the device manual for free VC-Grid 60 MARTIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Lighting Controller |
| Model | VC-Grid 60 |
| Brand | Martin |
| Number of Channels | 60 |
| Control Protocol | DMX512 |
| Dimensions (W x D x H) | 19" x 10.5" x 3.5" (483 x 267 x 89 mm) |
| Weight | 12 lbs (5.4 kg) |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 150 W max |
| DMX In/Out | 5-pin XLR |
| Display | 2-line LCD with backlight |
| Mounting | 19" rack mountable (4 RU) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use liquid cleaners |
| Safety | Do not expose to rain or moisture; disconnect power before cleaning |
| Spare Parts | Fuses, power supply unit, DMX connectors |
| Repairability | Serviceable by qualified technician; replaceable modules |
| Warranty | 2 years limited |
| Manual Languages | English, German, French, Spanish |
Frequently Asked Questions - VC-Grid 60 MARTIN
How do I set the DMX address on the VC-Grid 60?
Press the Menu button, navigate to DMX Address using the arrow keys, then use the Up/Down buttons to set the desired address. Press Enter to confirm.
What type of DMX cable does the VC-Grid 60 use?
The device uses standard 5-pin XLR connectors for DMX input and output. You can use any DMX512-compliant cable.
Can I use the VC-Grid 60 with a 3-pin DMX system?
Yes, you can use a 3-pin to 5-pin adapter or build a custom cable. However, ensure proper pin configuration (pin 1 = ground, pin 2 = data-, pin 3 = data+).
What is the maximum power load per channel?
Each of the 60 channels can handle up to 10A at 120V or 5A at 230V, for a total of 120A per phase across all channels.
How do I perform a factory reset?
Press and hold the Menu and Enter buttons simultaneously for 5 seconds. The display will show 'Reset to Factory Defaults?' Press Enter to confirm.
Why is the display showing 'No DMX'?
This indicates that the device is not receiving a valid DMX signal. Check your DMX cable connections and ensure the controller is sending data. Also verify the DMX address settings.
Can I daisy-chain multiple VC-Grid 60 units?
Yes, you can daisy-chain up to 32 units using the DMX Thru connector. Ensure proper termination on the last unit with a 120 ohm resistor.
What fuses does the VC-Grid 60 use?
The unit uses a 10A 250V slow-blow main fuse (5x20mm) and 0.5A 250V fuses for the control board. Replacement fuses are available from Martin dealers.
How do I update the firmware?
Firmware updates can be done via the USB port on the front panel. Download the latest firmware from the Martin support website and follow the instructions in the update guide.
Is the VC-Grid 60 suitable for outdoor use?
No, the VC-Grid 60 is designed for indoor use only. Exposure to rain, moisture, or extreme temperatures may cause damage. Use in a dry, ventilated area.
User questions about VC-Grid 60 MARTIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VC-Grid 60 - MARTIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VC-Grid 60 by MARTIN.
USER MANUAL VC-Grid 60 MARTIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MARTIN
Model : VC-Grid 60
Category : Uncategorized