APSUB-TY12 - Subwoofer PAC - Free user manual and instructions
Find the device manual for free APSUB-TY12 PAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Powered subwoofer |
| Brand | PAC |
| Model | APSUB-TY12 |
| Woofer size | 12 inches (30 cm) |
| Amplifier power | 200 W RMS |
| Frequency response | 30 Hz - 200 Hz |
| Adjustable crossover | 40 Hz - 180 Hz |
| Phase control | 0° or 180° |
| Enclosure type | Bass-reflex with front-firing port |
| Cabinet material | MDF (Medium-density fibreboard) |
| Finish | Black vinyl |
| Connectivity | Line-level RCA inputs and speaker-level inputs |
| Auto standby | Yes (<0.5 W consumption) |
| Power supply | AC 230 V, 50 Hz |
| Power consumption | 300 W max |
| Impedance | 4 ohms |
| Dimensions (W x H x D) | 350 x 400 x 430 mm |
| Weight | 14 kg |
| In the box | Subwoofer, power cable, user manual |
| Safety features | Short-circuit and overload protection |
| Cleaning | Wipe with a dry cloth |
Frequently Asked Questions - APSUB-TY12 PAC
How do I connect the subwoofer to my AV receiver?
Use the LFE or subwoofer output on your receiver and connect it to the line-level RCA input on the subwoofer using a single RCA cable. Alternatively, you can use the speaker-level inputs if your receiver lacks a dedicated subwoofer output.
What is the recommended crossover setting?
For home theater, set the crossover to 80 Hz if your main speakers handle midrange well. For music, adjust it to blend seamlessly with your speakers. Start at 80 Hz and fine-tune based on your listening preference.
Why is there no sound from the subwoofer?
Check the power cable, ensure the power switch is on, and verify the volume is not set to minimum. Also make sure the input source is properly connected and the receiver is sending a signal. The auto standby feature may have activated; increase the volume or play a bass-heavy track.
Can I use this subwoofer with a stereo amplifier?
Yes, connect the speaker-level outputs from your amplifier to the speaker-level inputs on the subwoofer, then connect your main speakers to the subwoofer's speaker-level outputs (if available) or directly to the amplifier. Alternatively, use the line-level pre-out if your amp has one.
How do I adjust the phase control?
The phase control shifts the subwoofer's output timing relative to the main speakers. Set it to 0° if the subwoofer is placed near the speakers. If it is far away or in a different position, try 180° and listen for which setting gives the strongest bass response at your listening position.
What is the auto standby feature?
When no audio signal is detected for a few minutes, the subwoofer automatically enters standby mode to save energy. It wakes up instantly when a signal is sent. The power consumption in standby is less than 0.5 W.
How do I clean the subwoofer cabinet?
Use a soft, dry cloth to wipe the outer surfaces. Do not use water, solvents, or abrasive cleaners, as they may damage the vinyl finish. Keep the grille and port clean from dust.
Is the subwoofer magnetically shielded?
This subwoofer is not specifically magnetically shielded. If you place it near a CRT television or sensitive magnetic media, ensure at least 0.5 meters of distance to avoid interference.
Can I place the subwoofer in a cabinet or on a shelf?
It is best to place the subwoofer on the floor in an open area for optimal bass propagation. Enclosed spaces or shelves may restrict airflow and cause unwanted resonances. If you must place it in a cabinet, ensure proper ventilation to avoid overheating.
What is the warranty on this product?
The warranty period is typically 1 year for the electronics and 5 years for the driver and cabinet. However, conditions may vary by region. Keep your proof of purchase and contact your local dealer for specific warranty terms.
User questions about APSUB-TY12 PAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual APSUB-TY12 - PAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APSUB-TY12 by PAC.
USER MANUAL APSUB-TY12 PAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PAC
Model : APSUB-TY12
Category : Subwoofer