Kendo+ - Lamp Spanninga - Free user manual and instructions
Find the device manual for free Kendo+ Spanninga in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Bicycle rear light |
| Brand | Spanninga |
| Model | Kendo+ |
| Category | Lamp |
| Light source | High-brightness LED |
| Power supply | Built-in rechargeable battery, USB charging |
| Charging time | Approximately 2 hours |
| Battery life | Up to 7.5 hours (steady mode) / 12 hours (flashing mode) |
| Light modes | Steady, flashing, daytime flashing |
| Sensor | Motion sensor for automatic on/off and brake light |
| Mounting | Seatpost clamp |
| Water resistance | IPX4 (splash-proof) |
| Visibility | Up to 180° visibility angle |
| Dimensions | Approx. 90 × 35 × 25 mm |
| Weight | Approx. 30 g |
| Materials | ABS plastic and rubber |
| Special features | Auto on/off, brake light, battery status indicator |
| Maintenance | Clean with a dry cloth; avoid high-pressure water spray |
| Safety | Check mounting regularly; remove before any cleaning with solvents |
| Spare parts | Replacement rubber strap and USB cable |
| Repairability | Battery replacement by a qualified specialist |
| Regulatory compliance | CE, RoHS |
| Warranty | 2 years |
Frequently Asked Questions - Kendo+ Spanninga
How do I charge the Spanninga Kendo+ rear light?
Connect the provided USB cable to the charging port and a USB power source. The charging indicator will show when fully charged. It typically takes 2 hours.
How long does the battery last on a full charge?
The battery life depends on the light mode: up to 7.5 hours in steady mode and 12 hours in flashing mode.
Can I use the Kendo+ in the rain?
Yes, the light is IPX4 water-resistant, so it can withstand splashing rain, but do not submerge it.
How do I mount the Kendo+ to my bike?
Use the included seatpost clamp and adjust the rubber strap to fit. Ensure it is securely attached and oriented for maximum visibility.
How does the automatic on/off work?
The integrated motion sensor turns the light on when it detects movement and off when the bike has been stationary for a while.
What is the brake light function?
The brake light sensor detects deceleration and activates a brighter light briefly, alerting traffic behind you.
How do I clean the lamp?
Use a soft, dry cloth to wipe the exterior. Avoid using solvents or high-pressure water, as these may damage the casing or seals.
Is the battery replaceable?
The battery is built-in, but it can be replaced by a qualified technician to extend the light's lifespan.
How do I know the battery level?
The battery status indicator shows the current level: green for high, red for low, and flashing red for charging.
What light modes are available?
The Kendo+ offers steady, flashing, and daytime flashing modes, which you can switch by pressing the button on the top.
User questions about Kendo+ Spanninga
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Kendo+ - Spanninga and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Kendo+ by Spanninga.
USER MANUAL Kendo+ Spanninga
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Spanninga
Model : Kendo+
Category : Lamp