B914 - Camera ACTi - Free user manual and instructions
Find the device manual for free B914 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Box IP Camera |
| Brand | ACTi |
| Model | B914 |
| Sensor | 1/2.8" Progressive CMOS |
| Resolution | 5 Megapixels (2592 x 1944) |
| Video Compression | H.265 / H.264 / MJPEG |
| Lens Type | CS-mount, varifocal (optional) |
| Minimum Illumination | 0.01 lux (color) |
| Network Interface | 10/100/1000 Mbps Ethernet |
| PoE Support | IEEE 802.3af PoE |
| Power Supply | 12V DC, PoE |
| Dimensions | 75 x 60 x 140 mm (approx.) |
| Weight | 550 g (approx.) |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Main Functions | Video surveillance, remote viewing, motion detection, day/night function |
| Maintenance and Cleaning | Clean the lens with a soft, dry cloth. Do not use strong solvents. |
| Safety | Install in well-ventilated area; use certified power sources. |
| Spare Parts and Repairability | No user-serviceable parts. Contact qualified service center for repair. |
| General Information | Manual available for download in PDF format. |
Frequently Asked Questions - B914 ACTi
How do I reset the ACTi B914 camera to factory defaults?
Press and hold the reset button on the camera (usually located near the network port) for about 10 seconds until the LED blinks. This restores factory settings.
How can I access the camera remotely from outside my network?
Set up port forwarding on your router for the camera's IP address and port, or use ACTi's cloud service for easier remote access.
How do I install the camera on a wall or ceiling?
Use the provided mounting bracket and screws. Ensure the surface is sturdy and the camera is securely fastened. Adjust the pan and tilt for desired viewing angle.
How to set up motion detection on the B914?
Log into the camera's web interface, go to Motion Detection under Video Settings, enable it, and define sensitivity and detection regions.
How do I connect the camera to a PoE switch?
Use a Category 5e or higher Ethernet cable to connect the camera's network port to a PoE switch. The camera will receive both power and data through a single cable.
How to update the firmware on the ACTi B914?
Download the latest firmware from ACTi's official website, then upload the file via the Firmware Upgrade page in the camera's web interface. Keep the power supply stable during update.
How can I improve the image quality?
Adjust focus and exposure settings, enable WDR for high-contrast scenes, and ensure adequate lighting or use infrared if supported.
How to connect the camera to an NVR (Network Video Recorder)?
Make sure the camera and NVR are on the same IP network. Add the camera to the NVR using its IP address, username, and password. Use ONVIF for compatibility.
What are the recommended network settings for the B914?
Assign a static IP address to the camera to avoid address changes. Use subnet mask of 255.255.255.0 and set the gateway to your router's IP.
How to clean the camera lens safely?
Use a soft, dry microfiber cloth to gently wipe the lens. If needed, use a small amount of lens cleaning solution on the cloth. Avoid harsh chemicals.
User questions about B914 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual B914 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B914 by ACTi.
USER MANUAL B914 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : B914
Category : Camera