UE32J5520AU - Television SAMSUNG - Free user manual and instructions
Find the device manual for free UE32J5520AU SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Samsung |
| Model | UE32J5520AU |
| Device type | LCD TV with LED backlight |
| Screen diagonal | 32 inches (81 cm) |
| Screen resolution | 1920 × 1080 (Full HD) |
| Screen format | 16:9 |
| Digital tuner | DVB-T2/C/S2 |
| Smart TV | Yes (Smart Hub) |
| Wireless connectivity | Wi-Fi, Miracast |
| Ports | HDMI ×2, USB ×1, Ethernet (LAN) |
| Sound power | 2 × 10 W |
| Power consumption | 30 W (0.3 W standby) |
| Mains voltage | 220-240 V, 50 Hz |
| Energy efficiency class | A |
| Dimensions with stand | 732 × 459 × 151 mm |
| Dimensions without stand | 732 × 421 × 64 mm |
| Weight with stand | 4.2 kg |
| Weight without stand | 3.8 kg |
| VESA mount | 200 × 200 mm |
| Features | "Cinema" mode, digital noise reduction |
| Package contents | Remote control, batteries, power cable, manual |
Frequently Asked Questions - UE32J5520AU SAMSUNG
How to perform initial setup of the Samsung UE32J5520AU TV?
When you turn on the TV for the first time, follow the installation wizard instructions. Select language, country, connect to the internet, and run auto channel tuning. To do this, connect an antenna or operator cable to the ANT IN connector.
How to connect an external device via HDMI?
Insert the HDMI cable into the HDMI port on the back panel. Then press the Source button on the remote and select the desired input. Picture and sound will appear automatically.
What to do if there is no sound?
Check the volume level and make sure it is not muted. Make sure the correct source is selected. If headphones are connected, disconnect them. In the Sound menu, you can configure output to speakers or an audio system.
How to connect the TV to Wi-Fi?
Go to Menu > Network > Network Settings. Select the connection type Wireless, find your network, enter the password, and confirm. The TV will save the settings.
How to set up digital channels manually?
Open Menu > Broadcasting > Channel Settings. Select the signal source (antenna or cable) and the Manual tuning mode. Enter the frequency, polarization, and symbol rate.
How to update the TV firmware?
Connect the TV to the internet and go to Menu > Support > Software Update. Select "Update Now". You can also download the file from the Samsung website to a USB drive and plug it into the USB port.
Can I mount the TV on a bracket?
Yes, there are mounting holes on the back panel for VESA 200×200 mm. Use a bracket suitable for the weight and size, and screws of the correct length to avoid damaging the casing.
How to use the sleep timer?
Press Menu, then select System (or General) and the Timer item. Set the time via the Off timer menu.
Why is Smart TV not working?
Check the internet connection via Menu > Network and run a network test. Make sure Smart Hub is enabled, and update the software. If the problem persists, reset Smart Hub in the Support section.
How to properly clean the TV screen?
Turn off the TV and unplug the power cord. Wipe the screen with a soft dry lint-free cloth. For heavy dirt, dampen the cloth with water or a special screen solution, but do not spray liquid onto the display.
User questions about UE32J5520AU SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual UE32J5520AU - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UE32J5520AU by SAMSUNG.
USER MANUAL UE32J5520AU SAMSUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SAMSUNG
Model : UE32J5520AU
Category : Television